Answer
Mar 20, 2023 - 02:28 PM
Setting the Clock
When the pump is first installed, it is necessary to set the clock. Any daily schedule set by the user must be based on an accurate time setting.
To Set the Clock:
1. Before setting the clock, apply power to the pump and ensure that it is in Schedule Mode (Schedule LED light is lit).
2. To begin, press and hold < and > together for 3 seconds. The TIME LED light will begin to flash. Press the MENU button to enter the “Set Clock” mode. The TIME LED will be on solid.
- NOTE: the TIME LED light will automatically begin flashing for 5 seconds when the pump is first turned on. You can also press MENU at this point to enter the “Set Clock” mode.
3. Use the < or > arrows to choose between a 12 or 24 hour time format.
4. Use the + or – buttons to change the displayed time to the correct time of day. In the 12 hour time format AM/PM will display in the bottom left corner.
5. To exit the clock setup mode, press and hold the MENU button until the TIME light goes out. The clock is now set.
If in Schedule mode, pressing START at this point will allow the pump to operate on the Default Schedule.
- NOTE: the pump will automatically begin to run the next time SPEED 1 is programmed to start. If desired, before this time you can press a SPEED button to manually run a preset speed/duration.
Add New Comment