Answer
May 30, 2023 - 09:03 AM
On page 11 of the Universal Manual is an explanation of the LCD:
1. Pool Temperature (xx degrees Fahrenheit or Celsius)
2. Cell Voltage (often 21.0 to 27.0 volts when chlorine is being generated, otherwise 16-31V)
3. Cell Current (often 2.50 to 7.80 amps when chlorine is being generated, otherwise 0 amps during normal rest cycles – see “Duty Cycle” below for more information.)
4. Selected Chlorine Output percentage level ("0p" to "100p" depending on dial position or input from remote pool automation controller)
5. Real-Time Salinity reading ( xxxx PPM or x.x grams/Liter.)
6. System ID
7. Software revision
This same information is printed inside the door you open to access the LCD.
1. Pool Temperature (xx degrees Fahrenheit or Celsius)
2. Cell Voltage (often 21.0 to 27.0 volts when chlorine is being generated, otherwise 16-31V)
3. Cell Current (often 2.50 to 7.80 amps when chlorine is being generated, otherwise 0 amps during normal rest cycles – see “Duty Cycle” below for more information.)
4. Selected Chlorine Output percentage level ("0p" to "100p" depending on dial position or input from remote pool automation controller)
5. Real-Time Salinity reading ( xxxx PPM or x.x grams/Liter.)
6. System ID
7. Software revision
This same information is printed inside the door you open to access the LCD.
Add New Comment