Replacement Parts Q&A

Question 1

Does this item come with an o-ring? View answer

Answer posted 3 years ago

Question 2

I have an RJ with 5 plates can you tell me what size that is View answer

Answer posted 3 years ago

Question 3

What is the correct cell code for the SI-60 cell View answer

Answer posted 3 years ago

Question 4

Do you have this in stock....it says call for availability.....if you don't have it will a SJ-40 work with my system? View answer

Answer posted 3 years ago

Question 5

I replaced my cell a few years ago, now it reads either low salt or no water. I took a sample to my local pools supply store to have the water tested as I have been adding salt. Their testing showed I have around 10000 ppm. Is my cell bad? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 6

Is there something like that for RJ classic? View answer

Answer posted 3 years ago

Question 7

does this replace my hayward goldmine turbo cell # TCELL940 ? MY POOL IS 10,000 GALLONS View answer

Answer posted 3 years ago

Question 8

I have a UL40 system, will this fit? View answer

Answer posted 3 years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 9

Can I return the item and is there a fee for returning the item? View answer

Answer posted 3 years ago

Question 10

I currently have an si 30 does it have to be replaced with another 30 salt cell or can I up size to a 40. My pool size is approx 15000 gallons but I’ve always tested low for chlorine for as long as I’ve had the system. Thank you. Rp 818 512 2264. View answer

Answer posted 3 years ago

Question 11

Can I use a SJ-55 cell on an original SJ-20 unit? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > SJ-Classic Replacement Cells

Question 12

is cable installed ready to use View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 13

My system is currently plumed for a Pentair 520555 IntelliChlor IC40. would this adapter kit work? Also would the i be able to mount the salt generator vertically instead of horizontally? Thanks, Gary . View answer

Answer posted 3 years ago

Question 14

Does the SI 45 replacement cell come with attaching cords? They're not shown in the photo and the cords are hard wired in my cell. View answer

Answer posted 3 years ago

Question 15

What is the highest cell I can use on a SJ30 system? View answer

Answer posted 3 years ago

Question 16

We have a CircuPool system. the controller is S/N 501530. We need a replacement cell electrode. what cell do we order? the SJ-55? View answer

Answer posted 3 years ago

Question 17

can i upgrade my rj 45 with the rj 60 cell? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 18

Will this product work as a replacement for a Circupool Universal40 Saltwater Chlorinator system? View answer

Answer posted 3 years ago

Question 19

My Cell that im replacing is a Si Plus what should I replace it with? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 20

I have an RJ 30 and need replacement "O" rings one for each end. Not sure the 3 you show fit my unit (purchased 2/2016). Please advise. Part number and cost. View answer

Answer posted 3 years ago

Question 21

I have a SI 40 will this replace that one... or do you have an SI40, thanks View answer

Answer posted 3 years ago

Question 22

How do you determine when cell needs replaced by looking at it? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 23

does this come as one or both pieces View answer

Answer posted 3 years ago

Question 24

What are the specific sizes of each of the 3 O rings? Where does each of the 3 O rings go? What are the instructions for replacing an O rings? Are any other parts needed? View answer

Answer posted 3 years ago

Question 25

Looking for replacement unions and O-rings for RJ-45+ What is the part number? View answer

Answer posted 3 years ago

Question 26

What is the part number for the RJ16 salt generator system? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > RJ PLUS-Series Replacement Cells

Question 27

Is this the correct 2" cell union for a RJ30+ system? View answer

Answer posted 3 years ago

Question 28

I have limited amount of space for a vertical installation. What is the height needed for a vertical install? If the unit cannot fit vertically, can it be installed horizontally using this vertical install kit? Thank you. View answer

Answer posted 3 years ago

Question 29

Does the replacement cell come with threaded collars and unions? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 30

Can I replace my SJ20 cell with a larger SJ40 cell. (2 steps up)? I was able to go up one size but can I do 2 sizes or even 3 using the same wall control unit? How do I tell if the wall controller unit is dead or its the cell? I run my system wide open 24-hrs a day to get enough Chlorine and I'd like to run it fewer hours. View answer

Answer posted 3 years ago

Question 31

Which direction is flow?? View answer

Answer posted 3 years ago

Question 32

What is the diameter of the threaded pipe this connects to? View answer

Answer posted 3 years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 33

Does the Bypass Cell for the RJ45 comes with O-rings at each end? View answer

Answer posted 3 years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 34

What version should be on the Circupool Module for the SI 30. I believe mine is set on 9. View answer

Answer posted 3 years ago

Question 35

is the whole unit sold or just the cell, and how easy to install,? View answer

Answer posted 3 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 36

Cutting the cord is okay when replacing the collar cap. Or is there a way to disassemble the plug? View answer

Answer posted 4 years ago

Question 37

is the sj40 the same as the sj45 cell? View answer

Answer posted 4 years ago

Question 38

will this fit the sj-15 salt cell . The one that holds the cell .with the cord to the clear plastic housing. my blue collar has a crack in it View answer

Answer posted 4 years ago

Question 39

Can I use this to bypass my CORE55 for the winter? Are the threads compatible? I would most likely need to shorten it to fit. I would rather remove the whole unit for the winter than using the cap for the unit and leaving the clear housing that may crack from freezing View answer

Answer posted 4 years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 40

Which terminal on the circuit board does the blue wire connect too ? Foolish me forgot to mark it when removing. View answer

Answer posted 4 years ago

Question 41

Will a sj 20 salt cell work on a sj 15 system View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > SJ-Classic Replacement Cells

Question 42

does it matter witch cell I replace the old one with View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 43

What is the water flow direction thru the cell View answer

Answer posted 4 years ago

Question 44

is this for in ground pools? View answer

Answer posted 4 years ago

Question 45

Is this the right 2" union for a RJ +? View answer

Answer posted 4 years ago

Question 46

I have received two of these cells from a CircuPool dealer and both of them will not thread onto my CircuPool RJ60+ union collars. They will thread onto the cleaning stand. Has CircuPool changed the suppliers recently, or changed the threads on one or the other? View answer

Answer posted 4 years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 47

Not sure what cell I need for proper replacement ? View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 48

Does this o ring fit the 2" union? View answer

Answer posted 4 years ago

Question 49

I am considering the Core55 replacing an a pure 1400 salt cell. Will this adapter work to replace the salt cell? View answer

Answer posted 4 years ago

Question 50

I read somewhere that I would need to get a core model for twice the size of my pool. I have a 22k gallon pool so with that logic I would need a core55. Also is there anything else I need to hardwire into my existing timer or should I get a new timer? View answer

Answer posted 4 years ago

Replacement Parts Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools