Replacement Parts Q&A

Question 1

Brand new aqua rite led no working,only display? View answer

Answer posted 4 years ago

Question 2

will the cleaning stand nut replace a cracked one on my salt cell? CIRCUPOOL® CLEANING STAND FOR CIRCUPOOL RJ, UNIVERSAL, AND SI SYSTEM can the nut with this replace a cracked nut on me cell housing? View answer

Answer posted 4 years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 3

I have a SI series but don't know, manual doesn't say, if its a 30 or 45? I have a 18,000 gallon pool. is the -30 and -45 the same overall length? Connections to the controller the same? I don't want to replumb the system. Thanks. View answer

Answer posted 4 years ago

Question 4

Can the convertor cell be mounted vertically and the flow detector be mounted on the adjacent horizontal run ? What horizontal straight tube length should precede the flow device along the horizontal tube run ? View answer

Answer posted 4 years ago

Question 5

Is it the exact size so I don't have to alter the plumbing? View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 6

Do I need this and how does it work.? is it connected to any thing like water or just a stand? View answer

Answer posted 4 years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 7

what is the difference in one cell to another if the computer system is the same? in other words, would say an SJ- 45 be the same as an SJ-30 as far as functionality View answer

Answer posted 4 years ago

Question 8

The keypad is showing output-off when I reset by pressing the + key and bring it up to 60 or 80, but in a few minutes or couple hours is back on output-off, Do I need a new keypad or a new circuit board? thank you View answer

Answer posted 4 years ago

Question 9

Does this also come with the cord to plug it into the control box? It does not show on the picture View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 10

I'd like to verify the size of these -rings before I order: diameter and thickness. I need to replace the O-rings on the unions for my circupool salt cell. I purchased the RJ30N "plus" unit in April, 2016.Can you provide the dimensions please? View answer

Answer posted 4 years ago

Question 11

Will this cable extend a Heyward T15 cell cable? I need more than the provided 15 feet View answer

Answer posted 4 years ago

Question 12

How do I open my housing to replace this cell? View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 13

Have an old RJ60. Does this replacement include both plastic housing and electrode? My plastic housing does not appear to be able to open to insert a new electrode View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 14

I have an RJ Classic system with an old tired RJ-20 salt cell. I have an RJ-30 salt cell that I want to use with the controller but I can't find a menu option to specify cell size. I noticed the display board inside has a push button. Is that a reset/initialize button or is their some hidden menu option for setting the cell size? thanks View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 15

Can this be used for 2 things ( pump and salt chlorinator) ? View answer

Answer posted 4 years ago | Replacement Parts > Parts & Accessories > Heavy Duty Outdoor Programmable Timer (110V)

Question 16

Is this a set or do I need to order 2? View answer

Answer posted 4 years ago

Question 17

What does this Vector Jet do? View answer

Answer posted 4 years ago | Replacement Parts > Parts & Accessories > Vector Jet

Question 18

where can i get a replacement keypad for the JS series unit? View answer

Answer posted 4 years ago

Question 19

Does this part have the rubber o-ring included? View answer

Answer posted 4 years ago

Question 20

so your answers says no direction but your directions clearly state a direction. Why is that? View answer

Answer posted 4 years ago

Question 21

Is this Vertical Installation Kit appropriate for a Si Plus Cell? View answer

Answer posted 4 years ago

Question 22

Is this for 2 unions and 2 Threaded Collars? Thanks View answer

Answer posted 4 years ago

Question 23

I have a pool that has a 15000 gallon capacity will this unit be more efficient? View answer

Answer posted 4 years ago

Question 24

Hello, Show me please by the arrow water flow in and out? thanks View answer

Answer posted 4 years ago

Question 25

Does this fit on a RJ60? View answer

Answer posted 4 years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 26

is there a way to recalibrate the salt readings. the unit said 3800 Part of salt ? but my local store checked the water and telling me I have way to much salt and 5000 parts View answer

Answer posted 4 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 27

Can you provide a picture of the CircuPool EDGE Cleaning Cap? View answer

Answer posted 5 years ago

Question 28

Will this bypass cell fit a Circupool Core 35 salt generator? View answer

Answer posted 5 years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 29

Hello, the Replacement Union looks like the part I need but I'm unsure. I do have a classic RJ system. The part I need fills the open end of the clear cylinder. It also hold the electrodes. I also need the bolts and male electrodes, and the rubber o ring. I would also like to buy a replacement electrical cord with the female red, black, and blue connectors attached. Could you please supply part number so I can order?Thank you, Rih Kosina View answer

Answer posted 5 years ago

Question 30

does anyone know where this o ring should go ? View answer

Answer posted 5 years ago

Question 31

Does this O Ring fits the union connection to the salt system? My system is RJ 30 cell and the connection that goes to the cell system is leaking. View answer

Answer posted 5 years ago

Question 32

Do these connect with the Core55? Are the O Rings included? View answer

Answer posted 5 years ago

Question 33

Will this repair the Rj systems ? View answer

Answer posted 5 years ago

Question 34

How does the 3 year limited warranty work on the CircuPool replacement cell? View answer

Answer posted 5 years ago

Question 35

How is the cable installed any cutting required? View answer

Answer posted 5 years ago

Question 36

Does this include the cable connecting to the monitor? View answer

Answer posted 5 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 37

Bought mine from you 7 years ago. I think its done.?. Hardly putting out any chlorine. Can I send you a video before I order. I have the rj 45. Thanks Matt Guthan View answer

Answer posted 5 years ago

Question 38

You only show one end of the cord. Does the other end have the threaded part that screws into the RJ-45 unit? View answer

Answer posted 5 years ago

Question 39

do you make a similar cap for the RJ+ (RJ60N) ? View answer

Answer posted 5 years ago

Question 40

My keypad no longer is working. Nothing is displayed. How do I replace it? View answer

Answer posted 5 years ago

Question 41

I need to replace my cell and can't find the model number. The cell is the Si series but I ma not sure if it is the 45 or the 30. My pool is a final liner 15x30 deep end 15 feet shallow end 3 feet. I live in South Florida. What would you recommend? View answer

Answer posted 5 years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 42

I currently own a Circu-pool Si series chlorine generator,. The current cell is a Si30 that has a maximum output to sustain a 30,000 gal pool. I have a 28,000 gal pool. The cell is in need to be replaced. Can I replace the Si 30 cell with a Si 45 cell? View answer

Answer posted 5 years ago

Question 43

Does this cell work for the sj45 unit or is there a different cell for it ? View answer

Answer posted 5 years ago

Question 44

Do this part fits on a power module serial 130273? View answer

Answer posted 5 years ago

Question 45

Can I replace a SJ 40 cell with and SJ55 utilizing existing SJ40 set-up? Will it actually perform better as I don't appear to be producing salt from existing SJ40 View answer

Answer posted 5 years ago

Question 46

Is it possible to get a replacement plastic ring that holds the electrodes? I dropped the electrode and the outer ring has broken. It still works, but is missing one side. View answer

Answer posted 5 years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 47

Only top line of text is appearing and then a small portion of it in missing. Will replacing the keypad fix this issue? View answer

Answer posted 5 years ago

Question 48

Is there a replacement cable for the RJ series which connects the controller to the cell? I believe my blue connector has failed. View answer

Answer posted 5 years ago

Question 49

I have a Si 40 but dont see this as an option on your website. Which one would I need? View answer

Answer posted 5 years ago

Question 50

I have an old RJ Classic model, can I replace it with an SJ system? I do not to really change the PVC plumbing for a new brand or model. What can I do...thanks? View answer

Answer posted 5 years ago | Replacement Parts > Replacement Cells > SJ-Classic Replacement Cells

Replacement Parts Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools