Replacement Parts Q&A

Question 1

Can the convertor cell be mounted vertically and the flow detector be mounted on the adjacent horizontal run ? What horizontal straight tube length should precede the flow device along the horizontal tube run ? View answer

Asked 4 ´years ago

Question 2

The keypad is showing output-off when I reset by pressing the + key and bring it up to 60 or 80, but in a few minutes or couple hours is back on output-off, Do I need a new keypad or a new circuit board? thank you View answer

Asked 4 ´years ago

Question 3

Do I need this and how does it work.? is it connected to any thing like water or just a stand? View answer

Asked 4 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 4

Does this also come with the cord to plug it into the control box? It does not show on the picture View answer

Asked 4 ´years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 5

I'd like to verify the size of these -rings before I order: diameter and thickness. I need to replace the O-rings on the unions for my circupool salt cell. I purchased the RJ30N "plus" unit in April, 2016.Can you provide the dimensions please? View answer

Asked 4 ´years ago

Question 6

what is the difference in one cell to another if the computer system is the same? in other words, would say an SJ- 45 be the same as an SJ-30 as far as functionality View answer

Asked 4 ´years ago

Question 7

Will this cable extend a Heyward T15 cell cable? I need more than the provided 15 feet View answer

Asked 4 ´years ago

Question 8

How do I open my housing to replace this cell? View answer

Asked 4 ´years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 9

Have an old RJ60. Does this replacement include both plastic housing and electrode? My plastic housing does not appear to be able to open to insert a new electrode View answer

Asked 4 ´years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 10

Just wanted to confirm that this would easily replace the T-Cell Aqua-rite with no additional calibration or other. Also, If I order today when should I expect it to be delivered to MN? View answer

Asked 4 ´years ago | Replacement Parts > Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 11

I have an RJ Classic system with an old tired RJ-20 salt cell. I have an RJ-30 salt cell that I want to use with the controller but I can't find a menu option to specify cell size. I noticed the display board inside has a push button. Is that a reset/initialize button or is their some hidden menu option for setting the cell size? thanks View answer

Asked 4 ´years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 12

Can this be used for 2 things ( pump and salt chlorinator) ? View answer

Asked 4 ´years ago | Replacement Parts > Parts & Accessories > Heavy Duty Outdoor Programmable Timer (110V)

Question 13

Is this a set or do I need to order 2? View answer

Asked 4 ´years ago

Question 14

What does this Vector Jet do? View answer

Asked 4 ´years ago | Replacement Parts > Parts & Accessories > Vector Jet

Question 15

where can i get a replacement keypad for the JS series unit? View answer

Asked 4 ´years ago

Question 16

Does this part have the rubber o-ring included? View answer

Asked 4 ´years ago

Question 17

so your answers says no direction but your directions clearly state a direction. Why is that? View answer

Asked 4 ´years ago

Question 18

I have a Goldline controller that was installed in 2002. It works fine with the original T-Cell-15. Do you know if this replacement cell will work with a controller from this date? View answer

Asked 4 ´years ago

Question 19

Is this Vertical Installation Kit appropriate for a Si Plus Cell? View answer

Asked 4 ´years ago

Question 20

Is this for 2 unions and 2 Threaded Collars? Thanks View answer

Asked 4 ´years ago

Question 21

I have a pool that has a 15000 gallon capacity will this unit be more efficient? View answer

Asked 4 ´years ago

Question 22

Hello, Show me please by the arrow water flow in and out? thanks View answer

Asked 4 ´years ago

Question 23

Does this fit on a RJ60? View answer

Asked 4 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 24

is there a way to recalibrate the salt readings. the unit said 3800 Part of salt ? but my local store checked the water and telling me I have way to much salt and 5000 parts View answer

Asked 4 ´years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 25

Can you provide a picture of the CircuPool EDGE Cleaning Cap? View answer

Asked 5 ´years ago

Question 26

Will this bypass cell fit a Circupool Core 35 salt generator? View answer

Asked 5 ´years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 27

Hello, the Replacement Union looks like the part I need but I'm unsure. I do have a classic RJ system. The part I need fills the open end of the clear cylinder. It also hold the electrodes. I also need the bolts and male electrodes, and the rubber o ring. I would also like to buy a replacement electrical cord with the female red, black, and blue connectors attached. Could you please supply part number so I can order?Thank you, Rih Kosina View answer

Asked 5 ´years ago

Question 28

does anyone know where this o ring should go ? View answer

Asked 5 ´years ago

Question 29

Does this O Ring fits the union connection to the salt system? My system is RJ 30 cell and the connection that goes to the cell system is leaking. View answer

Asked 5 ´years ago

Question 30

Do these connect with the Core55? Are the O Rings included? View answer

Asked 5 ´years ago

Question 31

Will this repair the Rj systems ? View answer

Asked 5 ´years ago

Question 32

How does the 3 year limited warranty work on the CircuPool replacement cell? View answer

Asked 5 ´years ago

Question 33

Does the CircuPool replacement cell for Hayward Aqua-rite T-cell-15 work with the 1.40 software, without any modifications? View answer

Asked 5 ´years ago

Question 34

How is the cable installed any cutting required? View answer

Asked 5 ´years ago

Question 35

Does this include the cable connecting to the monitor? View answer

Asked 5 ´years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 36

Bought mine from you 7 years ago. I think its done.?. Hardly putting out any chlorine. Can I send you a video before I order. I have the rj 45. Thanks Matt Guthan View answer

Asked 5 ´years ago

Question 37

You only show one end of the cord. Does the other end have the threaded part that screws into the RJ-45 unit? View answer

Asked 5 ´years ago

Question 38

do you make a similar cap for the RJ+ (RJ60N) ? View answer

Asked 5 ´years ago

Question 39

I need to replace my cell and can't find the model number. The cell is the Si series but I ma not sure if it is the 45 or the 30. My pool is a final liner 15x30 deep end 15 feet shallow end 3 feet. I live in South Florida. What would you recommend? View answer

Asked 5 ´years ago | Replacement Parts > Replacement Cells > Si-Series Replacement Cells

Question 40

My keypad no longer is working. Nothing is displayed. How do I replace it? View answer

Asked 5 ´years ago

Question 41

I currently own a Circu-pool Si series chlorine generator,. The current cell is a Si30 that has a maximum output to sustain a 30,000 gal pool. I have a 28,000 gal pool. The cell is in need to be replaced. Can I replace the Si 30 cell with a Si 45 cell? View answer

Asked 5 ´years ago

Question 42

What is the difference in this product and the actual Hayward Aqua-rite Turbo T-Cell-9 (T-9)? View answer

Asked 5 ´years ago

Question 43

Does this cell work for the sj45 unit or is there a different cell for it ? View answer

Asked 5 ´years ago

Question 44

Can I replace a SJ 40 cell with and SJ55 utilizing existing SJ40 set-up? Will it actually perform better as I don't appear to be producing salt from existing SJ40 View answer

Asked 5 ´years ago

Question 45

Do this part fits on a power module serial 130273? View answer

Asked 5 ´years ago

Question 46

Is it possible to get a replacement plastic ring that holds the electrodes? I dropped the electrode and the outer ring has broken. It still works, but is missing one side. View answer

Asked 5 ´years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 47

Only top line of text is appearing and then a small portion of it in missing. Will replacing the keypad fix this issue? View answer

Asked 5 ´years ago

Question 48

Is there a replacement cable for the RJ series which connects the controller to the cell? I believe my blue connector has failed. View answer

Asked 5 ´years ago

Question 49

I have a Si 40 but dont see this as an option on your website. Which one would I need? View answer

Asked 5 ´years ago

Question 50

I have an old RJ Classic model, can I replace it with an SJ system? I do not to really change the PVC plumbing for a new brand or model. What can I do...thanks? View answer

Asked 5 ´years ago | Replacement Parts > Replacement Cells > SJ-Classic Replacement Cells

Replacement Parts Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools