Question 1

I just ordered an RJ-45+. Should I install a check valve after the heater? View answer

Asked 4 ´years ago

Question 2

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 4 ´years ago

Question 3

Will this keypad fit my rj30 ? View answer

Asked 3 ´years ago

Question 4

How can I clean the clear chamber, I unscrewed the collar but i can't get the device apart. Thanks. View answer

Asked 4 ´years ago

Question 5

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 6 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 6

I HAVE DISCONNECTED MY UNIVERSAL SERIES FOR THE WINTER BUT MY FLOW SWITCH IS STILL IN MY FUNCTIONING SYSTEM CAN THE SENSOR BE UNSCREWED FROM TOP OF TEE/SWITCH BE TAKEN OUT AND PLUGGED WITH NO PROBLEM View answer

Asked 6 ´years ago | CircuPool® Flow Switch Housing

Question 7

where can buy the maie end of a cicircopool salt generator View answer

Asked 5 ´years ago

Question 8

where is reset button located on rj 45? My serial number is 030255 View answer

Asked 5 ´years ago

Question 9

My keypad no longer is working. Nothing is displayed. How do I replace it? View answer

Asked 7 ´years ago

Question 10

where can i get a replacement keypad for the JS series unit? View answer

Asked 6 ´years ago

Question 11

Would this work for a 1.5 HP pump? I've blown 2 timers in two years because they couldn't handle the load of the pump and salt system. View answer

Asked 4 ´years ago

Question 12

Is the screen replaceable? I did not see in on the site. View answer

Asked 4 ´years ago

Question 13

Can this be used for 2 things ( pump and salt chlorinator) ? View answer

Asked 6 ´years ago

Question 14

Can I get a complete flow switch including the tee fitting for the SJ series chlorinator? View answer

Asked 4 ´years ago

Question 15

Bought until 5 months ago and not generating. Power doesn’t seem to be getting to cell but control box lights working and has power. Any ideas? View answer

Asked 4 ´years ago

Question 16

I have a 5 plus year old SI45 now. I have replaced the cell and now it is blowing the fuse on the main panel. I’m not sure what the cost is to replace the main board or if I should purchase this new unit. Thoughts? View answer

Asked 4 ´years ago

Question 17

Will the universal 40 cell fit the t-15 directly. View answer

Asked 4 ´years ago

Question 18

Is there a replacement cable for the RJ series which connects the controller to the cell? I believe my blue connector has failed. View answer

Asked 7 ´years ago

Question 19

Will this work with a 25000 gallon above ground pool? View answer

Asked 4 ´years ago

Question 20

Is this system Hayward compatible? View answer

Asked 4 ´years ago

Question 21

I have a RJ 60 PLUS...........Will this fit my cell? What is 3rd generation? View answer

Asked 4 ´years ago

Question 22

Which direction does the flow switch face. With water flow holding the leg open that already stays open or against the water flow causing the leg to stay down. View answer

Asked 5 ´years ago

Question 23

High salt View answer

Asked 3 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 24

What is the salt level on this system View answer

Asked 4 ´years ago

Question 25

What are the dimensions of the control box. I need to decide where I can mount the box. Thanks View answer

Asked 4 ´years ago

Question 26

does this come as one or both pieces View answer

Asked 5 ´years ago

Question 27

Will this union set work on a SI series? View answer

Asked 3 ´years ago | CircuPool® Union Set for SmartFlo Variable Speed Pumps

Question 28

Why would the pump be sucking air? View answer

Asked 3 ´years ago | Pumps > SmartFlo VS Pumps

Question 29

Does this come as show, switch/cable/PVC? View answer

Asked 5 ´years ago

Question 30

1)Hi, are your generators universal voltage? Are there for 220 Volts? 2) How many years can work for a pool of 80,000 liters(21,000 gallons), Thanks View answer

Asked 4 ´years ago

Question 31

I just need the switch and attached cable? View answer

Asked 6 ´years ago

Question 32

What are the dimensions of the UL 40 and it's flow control unit. (LxW). I'm investigating an acceptable place to install in my existing cholorine system piping. I cannot find this info anywhere on your site. View answer

Asked 4 ´years ago

Question 33

Does this system have a remote start View answer

Asked 5 ´years ago

Question 34

do you have a wifi capable addapter to monitor the salt system on my mobile device? View answer

Asked 3 ´years ago | Sanitation > Salt Chlorinators

Question 35

I have a UL40 system, will this fit? View answer

Asked 5 ´years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 36

Does the Bypass Cell for the RJ45 comes with O-rings at each end? View answer

Asked 5 ´years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 37

I have an auto clear system will this this work to replace that system. Thanks Scott View answer

Asked 5 ´years ago

Question 38

I have a rjjc+30, sn 05a75da4d1850010, I need a replacement union, I do not know if it is a 3rd generation or not. Please advise. Thanks, Mark Goodrich View answer

Asked 4 ´years ago

Question 39

Will this bypass cell fit a Circupool Core 35 salt generator? View answer

Asked 6 ´years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 40

can you use the core 55 with 1.5 inch pvc plumbing that exists? thanks View answer

Asked 3 ´years ago

Question 41

Have a Hayward T9 that's bad but I'm not wanting to modify the plumbing. It this the same exact size lengthwise? View answer

Asked 3 ´years ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 42

I noticed in reading about my RJ+ 60 that you recommend a Cleaning Cap or Cleaning Stand to clean the cell of mineral build up. I went on line to look for these items, but only found the cleaning stand. Where can I find the cleaning cap? View answer

Asked 4 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 43

I own one of your systems and would like to purchase this cleaning base...I do not want to purchase the incorrect one...Would you be able to get back to me soon as my cell maintaince light is flashing... model # UL40... Number on cell is SI40...Thanks View answer

Asked 5 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 44

Can I replace the face on my RJ series? The digital screen no longer works. View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 45

I have an inground pool 13,500 gallon in southwest Florida what size SJ unit will i need ? View answer

Asked 5 ´years ago

Question 46

This unions fits on circupool 35 and 55 core ?? View answer

Asked 5 ´years ago

Question 47

Is there an adapter kit for a Compupool CPSC36 system? View answer

Asked 5 ´years ago

Question 48

On our second SJ40 and have never used Super CL Mode and would like to know should the light be red.?? We just had the pool redone and need to get the chlorine and salinity back up to where they need to be.......... View answer

Asked 7 ´years ago

Question 49

Is this for 2 unions and 2 Threaded Collars? Thanks View answer

Asked 6 ´years ago

Question 50

I bought a house with a 26qft pool. I'm trying to learn to control the salt chlorinator (SJ series) for my pool. The water is murky now, with algae. All parameters are ok (I check regularly), except chlorine and free chlorine levels, which are at 0. How do I know that the cell actually works? Is there a documentation regarding the controller? the left bottom green light has been blinking. Also, how is this controller related to the pump? I have Hayward controller for the pump, and I'm clueless here too. Please help. View answer

Asked 4 ´years ago

Browse by Topic

Tools