Sanitation Q&A

Question 1

I need to purchase a new system, is there anywhere I can look at how this is installed to see what I need to do if I replace by Frog system with this one. View answer

Answer posted 5 years ago

Question 2

can it connect to a smart phone? View answer

Answer posted 5 years ago

Question 3

how long does the edge 15 need to be run to meet the advertised chlorine rate per day? View answer

Answer posted 5 years ago

Question 4

How can you check if the cell is working. Thanks View answer

Answer posted 5 years ago

Question 5

Can this be used for an 8’x8’ below ground hot tub? View answer

Answer posted 5 years ago

Question 6

Hi, I have a pool of 22.000 gallons with a pump pentair of 2 HP SF-N1-2A (85 GPM Aprox). If I Installed a Universal 40 how many hours a day I must turn on the system ?. I live in Colombia and the temperature of the water is about 84 F. When you talk about 2.0 lb, how many working hours it means ? Regards, Diego. View answer

Answer posted 5 years ago

Question 7

What is the face to face dimension for the water in-out ports. Looking to directly replace inline chlorinator if possible. View answer

Answer posted 5 years ago

Question 8

How can I tell if my cell is not working? Normally it bubbles when in use. View answer

Answer posted 5 years ago

Question 9

How many amps does my CircuPool SJ pull? View answer

Answer posted 5 years ago

Question 10

I currently have a Jandy saltwater system and I am looking to replace it with something that actually works. Can you tell me what product would make sense to work with my Jandy system and work for my pool size (about 35,000 gallons) Thanks View answer

Answer posted 5 years ago

Question 11

Any estimate on when the SJ-35 will be back in stock? View answer

Answer posted 5 years ago

Question 12

I see the flow switch is integrated into the replaceable cell. Can it be repaired without replacing the entire cell? It seems flow switches are the weakest link with Pentair. While I like this system, I'm a little apprehensive. View answer

Answer posted 5 years ago

Question 13

Is there a specific flow direction for the RJ-45 plus electric cell? View answer

Answer posted 5 years ago

Question 14

I have a 15,000 gallon pool with a 3 year old waves/breeze unit that needs to be replaced. Just will not generate chlorine since install. Will this unit provide the correct chlorine and sanitizer needed for this size pool View answer

Answer posted 5 years ago

Question 15

Our pool has 6500 gal. and I think the CORE15 model should have the right size. 1. When do I have to change the cell for the first time? and 2. what means 8 years "limited"? Thank you, Thomas View answer

Answer posted 5 years ago

Question 16

Can you use the flow switch from my Hayward system or do I have to change it? Also what would be the shipping time after I order? Universal 40 View answer

Answer posted 5 years ago

Question 17

Does it need to be connected to 120v or 240v? View answer

Answer posted 5 years ago

Question 18

Do I need to install a check valve before the CORE35 to prevent superchlorinated water backflowing into my system when the pool pump is turned off? View answer

Answer posted 5 years ago

Question 19

How easy are is the SJ 35 to clean and how often does it need clening. View answer

Answer posted 5 years ago

Question 20

I reversed the cleaning amounts using more acid than water. Did i destroy the unit ? View answer

Answer posted 5 years ago

Question 21

Will the core55 fit right in the return line where the current Hayward CL200 3" tab chlorine is feeder is? Almost looks like it will. View answer

Answer posted 5 years ago

Question 22

Can this be installed at a diagonally? View answer

Answer posted 5 years ago

Question 23

Can this replace my intellichlor ic60 or does it require replumbing? How soon can I get it? View answer

Answer posted 5 years ago

Question 24

I need replacement o- rings for this chlorinator. Do you sell then. and if so, how much are they? View answer

Answer posted 5 years ago

Question 25

I’m thinking about changing over to a SWJ system, mainly due to issues with chlorine this year. Looking at a UL40.. 1) at 120v, how many amps does it pull? 2) does the plug in model need to be on a timer with the pump? Or is it smart enough to not work when there is no flow? 3) what are dimensions of the control box? View answer

Answer posted 5 years ago

Question 26

Can this be used as an initial conversion kit? Meaning I don't have a salt system can I install this product? Thanks View answer

Answer posted 5 years ago

Question 27

CircuPool product under serious consideration. Long time pool owner. 16x34 with diving end rectangular pool so I est. about 25,000 gals. DIY installation and controller can be in or out (exposed to all sun & elements). Can you suggest a good model for me? Thanks View answer

Answer posted 5 years ago

Question 28

What is the warranty? I don’t see any info here. View answer

Answer posted 5 years ago

Question 29

whats the difference between the core 35 and rj series? View answer

Answer posted 5 years ago

Question 30

What is the optimum Salt content for this unit. I think its referred to as Parts per million (PPM) Thank You View answer

Answer posted 5 years ago

Question 31

Are these in stock? My pool is only 8800 gallons. I don’t need the next size up. View answer

Answer posted 5 years ago

Question 32

When will SJ-20 system be available? View answer

Answer posted 5 years ago

Question 33

The description says this can be installed horizontally or vertically but then the website shows a ventricle installation kit. Does this mean the unit as purchased cannot be installed vertically out of the box? View answer

Answer posted 5 years ago

Question 34

Hi, Can I use this with my existing pool pump? Do you have it in stock? View answer

Answer posted 5 years ago

Question 35

What's the minimum flow required for the Core55? I'm currently at 1700rpm and seeing the no flow light? Any ideas? View answer

Answer posted 5 years ago

Question 36

what are the connection measurements, ie., length, dia. Where does the salt supply go and how long does it last. View answer

Answer posted 5 years ago

Question 37

What is the minimum GPM flow rate required for the Core series? View answer

Answer posted 5 years ago

Question 38

When its generating how do you know its producing View answer

Answer posted 5 years ago

Question 39

Does the control module have to be covered or is it waterproof? View answer

Answer posted 5 years ago

Question 40

I purchased a SJ-20 (from Amazon, hasn't arrived yet) it was a panic buy, only nine left yada yada, no chlorine available locally. but I realize now that the unit will likely be undersized as my pool is 30000 gallons. they didn't indicate volume or capacity and I did not find you website until after i made the purchase. So am i wasting my time with this unit or do I have any recourse ( upgrade path? bigger cell etc.) any input would be appreciated. View answer

Answer posted 5 years ago

Question 41

Is this system compatible to replace a compuclor? View answer

Answer posted 5 years ago

Question 42

I'm installing a 16x32 inground pool, approx 30,000 gallons. Instead of a chlorine pool, I'd like to make it salt water and looking at this unit. Will this suffice my pool size. No pump, filter are installed yet so now is the time for me to make this decision. View answer

Answer posted 5 years ago

Question 43

How often do you have to replace the salt cells? I see no mention of longevity View answer

Answer posted 5 years ago

Question 44

What is the correct cell code for the SI-60 cell View answer

Answer posted 5 years ago

Question 45

I am looking at ordering an Rj-30 plus does this run on 110 or 220 voltage or both? View answer

Answer posted 5 years ago

Question 46

How can I tell what my salinity level is on the Core35 unit? View answer

Answer posted 5 years ago

Question 47

How long is the power cord? View answer

Answer posted 5 years ago

Question 48

Is this a complete system? How easy is this to install? View answer

Answer posted 5 years ago

Question 49

Will I have to add salt to the pool at installation? If so how much salt do I add to a 20,000 gal pool at the beginning View answer

Answer posted 5 years ago

Question 50

My pool is 40,000 gallons. Will this work properly? How much salt will need to be added? View answers

Answer posted 5 years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools