Packages Q&A

Question 1

I have an inground pool 13,500 gallon in southwest Florida what size SJ unit will i need ? View answer

Asked 5 ´years ago

Question 2

I currently have a zodiac lm2-24 salt chlorinator. Does the Circupool sj-40 mount on the same plumbing? (i.e., have the same dimensions for its fittings? )or will I have to re-engineer the existing pvc? View answer

Asked 6 ´years ago

Question 3

How do I buy a replacement for the SJ 3500 Generator buy it's self?? View answer

Asked 4 ´years ago

Question 4

Just bought the sj35 and don’t see anywhere in the instructions how long the two risers have to be. How long should they be? View answer

Asked 5 ´years ago

Question 5

Will the plumbing for the SJ20 classic fit with the new SJ series? View answer

Asked 4 ´years ago

Question 6

When switching from chlorine to salt, do you have to start with fresh pool water or just add salt? View answer

Asked 1 ´year ago

Question 7

Does the unlimited combo package come with flow switch or T pipe or do they need to be purchased separately? View answer

Asked 1 ´year ago

Question 8

How easy are is the SJ 35 to clean and how often does it need clening. View answer

Asked 5 ´years ago

Question 9

What size set up for a 3000 gallon plunge pool? View answer

Asked 1 ´year ago

Question 10

Does it only work when pump running and does it have a chlorine level reading View answer

Asked 5 ´years ago

Question 11

Is this compatible for a compupool inlet and outlet hook ups? View answer

Asked 7 ´years ago

Question 12

i have a VS pump/electronic control . can generator be connected directly to pump without separate controller View answer

Asked 1 ´year ago

Question 13

Does this have a lithium battery? View answer

Asked 1 ´year ago

Question 14

Do I need a flow sensor with the SJ system? How do you know the differences between SJ-20 and others? Is it size of pool? Location? View answer

Asked 4 ´years ago

Question 15

Will the Sj-20 work with an above ground round 20’ x 48” Intex pool? If it does, do you have an adapter kit? The fittings are 1.5 in. View answer

Asked 4 ´years ago

Question 16

What length of horizontal pipe is needed to install SWG unit? View answer

Asked 6 ´months ago

Question 17

Is the SJ20 110 or 240 volt? View answer

Asked 4 ´years ago

Question 18

Can I use this unit with a variable speed (vs) pump? If so what rpm and duration settings should I use? View answers

Asked 5 ´years ago

Question 19

What is the optimum Salt content for this unit. I think its referred to as Parts per million (PPM) Thank You View answer

Asked 5 ´years ago

Question 20

When will SJ-20 system be available? View answer

Asked 5 ´years ago

Question 21

If I buy the Balance Control system now, will I be able to add on pump/heater/valve control for my Jandy equipment?

Asked 6 ´months ago

Question 22

I have 8,000 gal. Do they make a smaller unit? Thank you View answer

Asked 5 ´years ago

Question 23

Will this work on 24 round above ground pool that is 5 ft deep ? View answer

Asked 6 ´years ago

Question 24

61000 gallon pool View answer

Asked 4 ´months ago | Packages

Question 25

Can this be used on an above ground pool? View answer

Asked 6 ´years ago

Question 26

Is this a complete system? How easy is this to install? View answer

Asked 6 ´years ago

Question 27

we just recently bought this product and have questions. Is there a customer service department we can speak to? View answer

Asked 6 ´years ago

Question 28

DOES THE NO FLOW LIGHT STAY ON WHEN THE PUMP IS OFF? IF SO, HOW LONG? WILL I HAVE TO MANUALLY TURN IT OFF EVERY DAY? View answer

Asked 6 ´years ago

Question 29

How do I shock my salt water pool that has a RJ60+ system. View answer

Asked 4 ´years ago

Question 30

Hello, I have just purchased the RJ-30 Plus Salt system, and wanted to know it's power usage in Watts and Amps. Also, is it more efficient to connect it to 220v vs. 120v, and if so, how much more efficient? Whats the amperage & wattage for 220v vs. 120v connections? Thank you! View answer

Asked 5 ´years ago

Question 31

I just installed an RJ60+ in place of my Aquapure 1400. I was just wondering- on the unit, there is a “remote” indicator. What is this for? Are there ways to adjust the unit remotely, perhaps interfacing it with the Jandy system? Thanks. View answer

Asked 6 ´years ago

Question 32

Will the system say when it’s time to change the cell? View answer

Asked 6 ´years ago

Question 33

What is the minimum required flow (in GPM) for the RJ60+ Flow Switch to close and enable the Salt Cell to generate Chlorine? View answer

Asked 4 ´years ago

Question 34

max amperage draw at 220v View answer

Asked 5 ´years ago

Question 35

Can this replace a Jandy Aquapure 1400 with automation (Jandy AquaLink)? View answer

Asked 7 ´years ago

Question 36

I just ordered an RJ-45+. Should I install a check valve after the heater? View answer

Asked 4 ´years ago

Question 37

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 4 ´years ago

Question 38

How do you winterize the unit? View answer

Asked 4 ´years ago

Question 39

Does the control module have to be covered or is it waterproof? View answer

Asked 5 ´years ago

Question 40

When converting from a chlorine pool to this system, do I run the already chlorinated water through the system and add additional salt as needed? Thanks a lot for the assistance. View answer

Asked 4 ´years ago

Question 41

Does the power turn off to the plates when pump is off and it says no flow View answer

Asked 4 ´years ago

Question 42

We just cleaned our cell and now we are having issues with it communicating to the system. There is a code saying Cell Connection. We have inspected the all of the cables and everything look to be in good shape. We have powered it down several times and disconnected it several times as well yet we can not get the cell to communicate with the system, W”hat could be the cause of this code? View answer

Asked 5 ´years ago

Question 43

Just received it, and so psyched to replace my 18 year old Aquarite, it looks great. Can I keep the old flow switch from that system that still works fine, or do I need to swap in the new one. Just looking for simplicity in the install. Thanks, View answer

Asked 5 ´years ago

Question 44

how long does the edge 15 need to be run to meet the advertised chlorine rate per day? View answer

Asked 5 ´years ago

Question 45

When do you think this product will be available again? I am converting a 9 person hot tub to saltwater. Would the edge25 be too large for hot tub? View answer

Asked 4 ´years ago

Question 46

What is the max amp draw of this unit? I am trying to decide if I should add it to my pump circuit or add a new circuit and if the latter than size the circuit. View answer

Asked 4 ´years ago

Question 47

I have a timer on my pump. Does the generator need to be on a timer also or is it ok to just let the flow switch shut down the unit when the pump is off? View answer

Asked 4 ´years ago

Question 48

What size unit would I need for 18,000 pool 16 x 32 8 ft deep end 4 ft shallow View answer

Asked 4 ´years ago

Question 49

16x32 x 5what size system do I need View answer

Asked 4 ´years ago

Question 50

What size do I go with? My pool is 18 by 36 inground with a 4 foot shallow end and 9 feet in deep end which is gradual. Why would I choose one system over another?? What are your recommendations? I do not currently have a salt system View answer

Asked 4 ´years ago

Packages Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools