Salt Chlorinators Q&A

Question 1

What determins when your RJ+45 Series" goes into it's "REST Cycle"? View answer

Asked 7 ´years ago

Question 2

How long is the salt generator supposed to last? I just recently cleaned mine as instructed reinstalled and it stop View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 3

salt light flashing View answer

Asked 1 ´month ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 4

Hi, I'm a return customer. Well, I think it's time to replace the old system with a new one. My question is... I see a round "white" fitting with wires attached in your photos. What is that? I don't have anything like that on my current system (RJ20 serial # 030282). Also, will the chlorinator fit the same fittings as my old system? Thank You! View answer

Asked 4 ´years ago

Question 5

Is it ok for the chlorine generator to stay powered on 24 hours a day while the pool pump only runs about 10 hours? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 6

Salt cell is reading 0 amps

Asked 5 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 7

What size unit would I need for 18,000 pool 16 x 32 8 ft deep end 4 ft shallow View answer

Asked 4 ´years ago

Question 8

16x32 x 5what size system do I need View answer

Asked 4 ´years ago

Question 9

I am trying to decide between this rj30 and your core 35 could you give me some help I have 15000gl pool changing from tables to salt View answer

Asked 4 ´years ago

Question 10

I have an SJ45A System that won't generate chlorine. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 11

CircuPool Universal Series Salt Chlorinator O-rings View answer

Asked 2 ´years ago

Question 12

My RJ45 control module shows cell volts 12.2 cell Amps 0.00A, power is set at MAX. Salinity shows Average:0000 View answer

Asked 2 ´years ago

Question 13

Do the CircuPool CORE salt chlorine generators require a flow switch be installed or is it built in? View answer

Asked 1 ´month ago | Sanitation > Salt Chlorinators > CORE Series

Question 14

Super Chlor light not going on View answer

Asked 1 ´year ago

Question 15

My salt level never reads correctly, it's around 1000ppm off reading high View answer

Asked 5 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 16

My ul40 salt read went from 3300 to 0000 Why? View answer

Asked 5 ´months ago

Question 17

Cell Connection Message View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 18

"Cell Connection" Error View answer

Asked 2 ´years ago

Question 19

Do I need the flow switch? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 20

What is the recommended GPM flow for the RJ45 system, Core35, and Core55 systems? View answer

Asked 6 ´years ago

Question 21

How long is the cord that connects the cell housing to the control module? View answer

Asked 5 ´years ago

Question 22

It is OK to have cell installed during opening clean, balance and shock treatment? View answer

Asked 5 ´months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE55 Salt Chlorine Generator

Question 23

Checking on an order from yesterday. Never got a confirmation. It was a flow sensor for a SJ series View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 24

Where does the gasket go? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 25

Low water sensor fault?

Asked 2 ´months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 26

What might be the cause on the CircuPool RJ 45 plus if I cannot adjust the power level? View answer

Asked 26 ´days ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 27

What salinity ppm (high limit) stops generating chlorine? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 28

Why dose my salt cell only work 90% or max the cell is clean

Asked 5 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 29

I bough the RJ -30 system April 2016 and I would like to know if there is a way to tell if it is still putting out as much chlorine as it was designed to? View answer

Asked 7 ´years ago

Question 30

I have an inground pool 13,500 gallon in southwest Florida what size SJ unit will i need ? View answer

Asked 5 ´years ago

Question 31

Screen is frozen with "cell connection " error message. It won't turn off by pushing the button. Warranty coverage? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 32

I have a SI series but don't know, manual doesn't say, if its a 30 or 45? I have a 18,000 gallon pool. is the -30 and -45 the same overall length? Connections to the controller the same? I don't want to replumb the system. Thanks. View answer

Asked 6 ´years ago

Question 33

I currently have an si 30 does it have to be replaced with another 30 salt cell or can I up size to a 40. My pool size is approx 15000 gallons but I’ve always tested low for chlorine for as long as I’ve had the system. Thank you. Rp 818 512 2264. View answer

Asked 5 ´years ago

Question 34

Controller orientation View answer

Asked 3 ´years ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 35

Temp high View answer

Asked 7 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 36

I currently own a Circu-pool Si series chlorine generator,. The current cell is a Si30 that has a maximum output to sustain a 30,000 gal pool. I have a 28,000 gal pool. The cell is in need to be replaced. Can I replace the Si 30 cell with a Si 45 cell? View answer

Asked 7 ´years ago

Question 37

What is the process of changing over to a chlorinator. Do I add salt immediately? View answer

Asked 3 ´years ago

Question 38

Hi there, I have a Circupool Si 45 salt cell that has gone bad. Can I replace it with a Si 60 cell instead? Is the size the same for both? I have a 36,000 gallon pool in the Dallas area. Thanks, Anton View answer

Asked 4 ´years ago

Question 39

Have RJ +30, Why has my orange power ON Off button with the green LED started to flash. Sometimes if flashes on View answer

Asked 2 ´months ago

Question 40

Can I replace the face on my RJ series? The digital screen no longer works. View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 41

What does it indicate on a Circupool SJ40, If the cell seems to turn things in the housing an orange color? Is it a cell problem or a chemical problem? View answer

Asked 4 ´years ago

Question 42

Oversized Salt Chlorinator System View answer

Asked 1 ´year ago

Question 43

Will this unit work for my 2200 gal pebble tec spa? Any special setting requirements since my spa much less than 15000 gal capacity of the CORE15? View answer

Asked 5 ´years ago

Question 44

Salinity level display View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 45

What is the length of the power and cell cords for the CircuPool® SJ-20 Salt Chlorine Generator? View answer

Asked 3 ´years ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool® SJ-20 Salt Chlorine Generator

Question 46

The CircuPool RJ keypad controls show a high temp warning but everything else doesn’t light up or work. View answer

Asked 2 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 47

Flow switch View answer

Asked 2 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 48

What is the rated amperage for the CircuPool SJ-20 Salt Chlorine Generator? View answer

Asked 3 ´years ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool® SJ-20 Salt Chlorine Generator

Question 49

Salt reading 0000 what does that mean . Light is on power and light is on generating but reading 0000 View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 50

Is there an adaptor for the RJ45 PLUS to replace a Pentair Intellichlor Ic 40? View answer

Asked 1 ´month ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Salt Chlorinators Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools