Sanitation Q&A

Question 1

Can't read most numbers on screen. View answer

Asked 8 ´months ago

Question 2

My old Hayward Aquarite was vertical with no flow switch needed. Do I need one for the RJ45? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool® RJ-45 PLUS Salt Chlorine Generator

Question 3

The power button does not respond. Can I fix it? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 4

Low Salt light blinking on my CircuPool Edge 25. It was installed 1 month ago, test strips and tester read 3900, and the pool temp is 82. View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 5

I have the system with 3 CO2 cylinders. Can I open all 3 cylinders at the same time or I have to open one by one? View answer

Asked 8 ´months ago | Sanitation > pH Control > CircuPool TOTALBalance pH Control System with Patented CO2 Infusion

Question 6

Unit appears wired for 220 yet the wire colors are black white and green. Code says black red and green. View answer

Answer posted 8 months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 7

We have a 60000 gal pool at our yacht club View answer

Asked 8 ´months ago

Question 8

What is the recommended breaker size for a 240 volt installation? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 9

"Hot" error message. View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 10

Does it hurt the salt generator to be running when the pump is off and no water going through? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 11

What is the total length required for the flow switch and salt cell? View answer

Asked 8 ´months ago

Question 12

I have a 16,000 gallon above ground pool, will the Edge Series work? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > EDGE Series

Question 13

I have an 80000 gallon pool which is heated in winter. Can I use two sj55's, on e on each heater? View answer

Asked 8 ´months ago

Question 14

I have an Si-30+ saltwater chlorinator. Will the Si-30 electrode replace my old cell? View answer

Asked 8 ´months ago

Question 15

flow led changing red to green; 6 seconds green - 8 seconds red - then green again View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 16

I have never seen a positive current reading from the menu. What's wrong? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 17

How do you remove the cell from Control Module View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 18

Am I able to bond the Edge system with my pool? I don’t see anywhere to connect the bonding wire? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 19

Does this core35 fit an older version (2021) Core35 chlorine generator? View answer

Asked 9 ´months ago

Question 20

Can you replace a ul-25 cell with a ul-40cell? View answer

Asked 9 ´months ago

Question 21

Is there a way to set run time limit? View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 22

The generator won’t go above 50%. I click the “+” but it stops at 50% View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 23

I am thinking of buying the Core 35. Where can I view the manufacturer's details of the limited 8 year warranty? View answer

Asked 9 ´months ago

Question 24

What size salt system do I need for my pool? View answer

Asked 9 ´months ago

Question 25

What does it mean when the display says COLD View answer

Asked 9 ´months ago

Question 26

I have a pool with 1 1/2 inch size piping can I use a 2 inch adapter to install the Core? View answer

Asked 9 ´months ago

Question 27

Bonding View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 28

Is large O ring for electrolytic cell necessary? SJ 35A arrived without it. View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-Classic Series Salt Chlorine Generators - Owner Resources

Question 29

The clear shield on the front of the main box has deteriorated and cracked. Do you sell a replacement? View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 30

I clean cell put it back on and the light continues blinks to clean View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 31

If I buy a new system on eBay from a vendor that is not a Circupool dealer, will that affect the warranty? View answer

Asked 9 ´months ago

Question 32

How do I order a dang cleaner cap and stand? View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 33

When adding salt for maintenance reasons should I turn off the SWG for a period of time? View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 34

Says hot View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 35

Is there a cap to clean the cell View answer

Asked 10 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 36

Would the CircuPool® Universal 55 be ok for a 25, 000 gallon pool? Would this larger unit be beneficial or too large for the pool?

Asked 10 ´months ago

Question 37

Will an ozone system work for an indoor pool? View answer

Answer updated 10 months ago | Sanitation > Ozone Generators

Question 38

control panel will not go higher than 50% View answer

Asked 10 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 39

Can I use a hayward salt cell on circupools rj45 plus. System View answer

Asked 10 ´months ago

Question 40

Where can I find the CircuPool serial number on my equipment?? View answer

Question updated 11 months ago

Question 41

Are the pipe fittings the same with the new Core as prior generation Core? View answer

Asked 11 ´months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 42

Is this unit CircuPool® Universal55 Salt Chlorine Generator a complete unit not just the generator ? View answer

Asked 11 ´months ago

Question 43

I love my salt chlorine generator but I use a lot of acid for the pH. Is this caused by it generating chlorine? View answer

Asked 11 ´months ago

Question 44

Reading on unit says cell not match.. View answer

Asked 11 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 45

Readout says "cell not match" also the system will not power off...none of the buttons work ...help. View answer

Asked 11 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 46

I cleaned the cell but the clean cell light is still on View answer

Answer updated 11 months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 47

register my device

Asked 11 ´months ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 48

My system error light is on. What should I do? View answer

Asked 11 ´months ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 49

Do I need to register my new system and if so, where do I register it at? View answer

Asked 12 ´months ago

Question 50

I keep getting a message across th screen of my unit that says "High Temp" I cant get any of the buttons to respond View answer

Asked 12 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools