CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources Q&A

Question 1

Question about the Voltage View answer

Asked 2 ´years ago

Question 2

Screen problems View answer

Asked 1 ´year ago

Question 3

Do I use the setting +30 or -30 for the RJ plus 30? View answer

Asked 2 ´years ago

Question 4

Cell Connection Message View answer

Asked 2 ´years ago

Question 5

my system is several years old. I just started it up and it says cell no match?? View answer

Asked 2 ´years ago

Question 6

What is the RJ+ cell unit's maximum pressure (PSI) rating? View answer

Asked 4 ´years ago

Question 7

Hello. I have an RJ-60+ which is rated at 300W, so presumably it only draws 1.36A at 220V. However, the manual also mentions the cell current ranging between 2.5 and 7.8 amps. I can also see the cell current displayed when I cycle through the menu options. For example, at 50%, it shows 5.7 amps. I'm assuming this cell current is different from the load on the circuit breaker. Can you confirm please? View answer

Asked 4 ´years ago

Question 8

Is there a place where i can get actual dimensions? Like a shop drawing. Ive already managed to rule out the CORE55 from rough dimensions given to another. I suspect this model will be a much more close call on fitting. View answer

Asked 5 ´years ago

Question 9

I just installed an RJ60+ in place of my Aquapure 1400. I was just wondering- on the unit, there is a “remote” indicator. What is this for? Are there ways to adjust the unit remotely, perhaps interfacing it with the Jandy system? Thanks. View answer

Asked 6 ´years ago

Question 10

My RJ-45 is showing negative amps View answer

Asked 2 ´years ago

Question 11

Does the control module have to be covered or is it waterproof? View answer

Asked 5 ´years ago

Question 12

How often do you have to replace the salt cells? I see no mention of longevity View answer

Asked 5 ´years ago

Question 13

Do you offer extensions/adapters for the rj cell to connect to the power supply box? My power wall is about 6 feet farther than the provided cables length. Can I use a standard adapter to extend this? View answer

Asked 5 ´years ago

Question 14

I am getting ready to install this unit but may have to install it vertically. What, if anything, do I need to do to insure the system works properly? Thanks, Marty View answer

Asked 5 ´years ago

Question 15

How can I tell when my electrolytic cell is bad? View answer

Asked 2 ´years ago

Question 16

Message box says cell connection. No buttons work View answer

Asked 2 ´years ago

Question 17

We just bought our house and the panel won’t turn on at all. View answer

Asked 2 ´years ago

Question 18

What pool water test equipment do you use and recommen d?

Asked 4 ´months ago

Question 19

Can this device be connected to wifi View answer

Asked 4 ´months ago

Question 20

Can the RJ30 system be installed at a 45 degree angle? View answer

Asked 2 ´years ago

Question 21

Generate light flashing View answer

Asked 4 ´months ago

Question 22

Total life View answer

Asked 2 ´years ago

Question 23

Water testing shows salt level at 2800, but CircuPool RJ+ is displaying 3800. Is there away to reset the RJ60+

Asked 2 ´months ago

Question 24

My pool's pump is off with power to the RJ-30. is that OK? View answer

Asked 2 ´years ago

Question 25

The generator won’t go above 50%. I click the “+” but it stops at 50% View answer

Asked 2 ´years ago

Question 26

Do we have to register our product View answer

Asked 3 ´months ago

Question 27

I have the RJ +45 and it is not generating was just cleaned and salt levels are good. What is wrong?

Asked 3 ´months ago

Question 28

Is the salt cell directional?

Asked 2 ´months ago

Question 29

The unit is on and it says says cell connection and none of the buttons are responding and I have powered it off an View answer

Asked 3 ´months ago

Question 30

15 amp blade fuse keeps blowing

Asked 2 ´months ago

Question 31

No cell connection won’t turn off View answer

Asked 2 ´years ago

Question 32

cell connection message and control panel will not power off with power button View answer

Asked 2 ´years ago

Question 33

I'm showing 26.4 = 27.1 volts >>>0,00 amps . Is this correct ?

Asked 2 ´months ago

Question 34

My RJ45 powers on and generates chlorine but the menu and salinity buttons don’t work

Asked 1 ´month ago

Question 35

The “Cell Connection “ comes up on the display and nothing works View answer

Asked 2 ´years ago

Question 36

Display shows zero salinity and temp of 164 degrees. Cell was cleaned and no change. Appears to be generating cl View answer

Asked 3 ´years ago

Question 37

No flow

Asked 1 ´month ago

Question 38

Does a new unit ship with temp

Asked 17 ´hours ago

Question 39

The control panel on my RJ plus does not cycle through the menu. View answer

Asked 1 ´year ago

Question 40

Do you make an extension cable for the rj 45 cell? View answer

Asked 3 ´years ago

Question 41

RJ-60 Plus does the direction of flow through the cell matter? View answer

Asked 3 ´years ago | Support

Question 42

Will this keypad fit my rj30 ? View answer

Asked 3 ´years ago

Question 43

1. On my screen it says power 50% it will not go higher. Is this because the water temp is less than 60 degrees. 2. Will it go higher when the water temp goes up View answer

Asked 5 ´years ago

Question 44

Installed the RJ-30 just before summer hit here in the Houston area on a ~15K gallon pool. Just want to know if having to run it at around 85-90% power is normal for the hot summer days on this size of pool. View answer

Asked 4 ´years ago

Question 45

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 4 ´years ago

Question 46

Part Number: RJ20N-3300-7A I am not able to order this product. Is it out of stock? View answer

Asked 1 ´year ago

Question 47

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 5 ´years ago

Question 48

Rj45+ has power, but not generating View answer

Asked 3 ´years ago

Question 49

I can only increase my salt production to 50%

Asked 1 ´month ago

Question 50

The fuse blows very soon after replacing View answer

Asked 1 ´year ago

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic

Tools