Ask a Question

Ask your question here...

Home
Login
Register

Search...

Sanitation > Salt Chlorinators > RJ PLUS Series >

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources Q&A

Filter

Activity timeframe

Apply filters

Questions

Most Popular

Recently Asked

Recently Active

if set below 70% my generator stops generating. i shut off and turn on it starts generating then stops again View answer

Asked 1 ´year ago

what is the position of the data jumper? View answer

Asked 1 ´year ago

how to register my product View answer

Asked 1 ´year ago

Salt cell is clogged within a week View answer

Asked 8 ´months ago

I just checked my RJ 60 system and with pump on the unit was off and couldn’t be turned back on. View answer

Asked 8 ´months ago

I bough the RJ -30 system April 2016 and I would like to know if there is a way to tell if it is still putting out as much chlorine as it was designed to? View answer

Asked 6 ´years ago

Noticed lots of calcium all over my pool what can I do to eliminate this View answer

Asked 7 ´months ago

Asked 5 ´years ago

what are dimensions of control box. RJ-30 I want to mount it on the circuit breaker panel. View answer

Asked 3 ´years ago

Why does it show no cell match? View answer

Asked 7 ´months ago

Reported Temperature is high. View answer

Asked 1 ´year ago

I just ordered an RJ-45+. Should I install a check valve after the heater? View answer

Asked 3 ´years ago

Cell connection View answer

Asked 1 ´year ago

Question about the Voltage View answer

Asked 1 ´year ago

How do you access the Internal jumpers View answer

Asked 10 ´months ago

No flow View answer

Asked 11 ´months ago

When running my RJ60 at any power setting I am getting very much white crystal looking debris from my return nozzle View answer

Asked 1 ´year ago

I divert water to my deck jets and pool slide. Does it hurt the system to have the pump on & no water going to salt View answer

Asked 1 ´year ago

New system installed how long should low salt light and cell maintenance stay on View answer

Asked 1 ´year ago

The RJ45+ touch pad stopped working properly View answer

Asked 1 ´year ago

Flow Switch light is flashing View answer

Asked 1 ´year ago

We just bought our house and the panel won’t turn on at all. View answer

Asked 1 ´year ago

The power light is lit and the display says, “Cell connection” but the green generator light is not lit. View answer

Asked 1 ´year ago

Flow sensor warranty? View answer

Asked 1 ´year ago

Pictures on how to install system View answer

Asked 11 ´months ago

Salt reading low View answer

Asked 11 ´months ago

Flow switch View answer

Asked 1 ´year ago

My unit will not power off with the panel button View answer

Asked 1 ´year ago

No amps View answer

Asked 1 ´year ago

control panel will not go higher than 50% View answer

Asked 2 ´years ago

"Cell Connection" locks up display and controls. My understanding there is a module addition to fix this issue ? View answer

Asked 1 ´year ago

Low salt light View answer

Asked 1 ´year ago

Menu button not working View answer

Asked 11 ´months ago

How do I replace the keypad (3rd gen RJNK16) ? View answer

Asked 1 ´year ago

Does it hurt the salt generator to be running when the pump is off and no water going through? View answer

Asked 2 ´years ago

We have a 60000 gal pool at our yacht club View answer

Asked 2 ´years ago

Low Chorine View answer

Asked 1 ´year ago

What size breaker is needed for a RJ45 ? Can I tie the pump and rj45 together? The 3 hp circuit pump says to not View answer

Asked 1 ´year ago

Why does my display say "LOW TEMP" and not generating....says water temp is 46 degrees and my Jandy says its 78 deg View answer

Asked 1 ´year ago

NO SALINITY READING WHEN BUTTON PUSHED ON RJ30 PLUS View answer

Asked 1 ´year ago

"Cell Connection" frozen on the screen. What can I do? View answer

Asked 1 ´year ago

Just installed a new Circupool RJ60 no flow light is on View answer

Asked 1 ´year ago

High water temp View answer

Asked 8 ´months ago

Power level readings View answer

Asked 2 ´years ago | Support

I just purchased RJ60+ System. Is there a maximum flow limit that I shall not exceed for the Salt Cell.? Maximum flow, for example 85 GPM, for their Salt Cell. View answer

Asked 3 ´years ago

How, and who, do I contact about the bad salt cell in my system that is one year old? View answer

Asked 8 ´months ago

Hello. I have an RJ-60+ which is rated at 300W, so presumably it only draws 1.36A at 220V. However, the manual also mentions the cell current ranging between 2.5 and 7.8 amps. I can also see the cell current displayed when I cycle through the menu options. For example, at 50%, it shows 5.7 amps. I'm assuming this cell current is different from the load on the circuit breaker. Can you confirm please? View answer

Asked 4 ´years ago

Hello, I have just purchased the RJ-30 Plus Salt system, and wanted to know it's power usage in Watts and Amps. Also, is it more efficient to connect it to 220v vs. 120v, and if so, how much more efficient? Whats the amperage & wattage for 220v vs. 120v connections? Thank you! View answer

Asked 4 ´years ago

The fuse blows very soon after replacing View answer

Asked 8 ´months ago

I can’t find the cap for cleaning cells. I must have thrown it away when unpacking my RJ 45 View answer

Asked 8 ´months ago

Show: Select how many pieces of content to show

View More Product Details

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Learn how to get the most out of your RJ-Series Salt System

View Details

Related Product

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Learn how to get the most out of your RJ-Series Salt System

View Details

Browse by Topic

Sales
Sales
Support
Support
Other
Other

Tools

Help

Search...

Home | Terms & Conditions | Help

Please wait...