RJ PLUS Series Q&A

Question 1

I currently have an RG 30 but it doesn’t seem to be reading the salinity levels correctly. I’m wondering if I need to purchase a separate new cell. If so how much would it be?Many thanks Jeff View answer

Asked 2 ´years ago

Question 2

I bough the RJ -30 system April 2016 and I would like to know if there is a way to tell if it is still putting out as much chlorine as it was designed to? View answer

Asked 6 ´years ago

Question 3

Can Magnesium chloride be used with this? View answer

Asked 4 ´months ago

Question 4

what is the position of the data jumper? View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 5

My pool is 26000 gallons in ground pool and wondering which salt water system I need to satisfy my gallons View answer

Asked 1 ´year ago

Question 6

Power button is not working View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 7

Just purchased RJ30. Was told it is a self cleaning unit utilizing revers polarity. How do I know when it is in cleaning mode? View answer

Asked 5 ´years ago

Question 8

I am getting ready to install this unit but may have to install it vertically. What, if anything, do I need to do to insure the system works properly? Thanks, Marty View answer

Asked 3 ´years ago

Question 9

I have an RJ-30 Plus system. What is the effect of Cell Version setting on the Menu? Each numerical value also has a '+' and '-'. What does this do to the operation of the system? This is not mentioned anywhere in the manual. View answer

Asked 3 ´years ago

Question 10

Installed the RJ-30 just before summer hit here in the Houston area on a ~15K gallon pool. Just want to know if having to run it at around 85-90% power is normal for the hot summer days on this size of pool. View answer

Asked 2 ´years ago

Question 11

What are the dimensions of the electronics box? Does it have a door that has to be swung open? I am concerned about clearances. I now have a Hayward box. View answer

Asked 5 ´years ago

Question 12

I just installed an RJ60+ in place of my Aquapure 1400. I was just wondering- on the unit, there is a “remote” indicator. What is this for? Are there ways to adjust the unit remotely, perhaps interfacing it with the Jandy system? Thanks. View answer

Asked 4 ´years ago

Question 13

How do I get the CircuPool® RJ60 Classic Replacement Cell (Electrode Only) into my Circupool RJ 60+ housing? View answer

Asked 4 ´months ago

Question 14

Does the RJ45 refer to pool size (45,000 Ga's) or does the 45 represent the element output in grams per hour? View answer

Asked 4 ´years ago

Question 15

Is there a place where i can get actual dimensions? Like a shop drawing. Ive already managed to rule out the CORE55 from rough dimensions given to another. I suspect this model will be a much more close call on fitting. View answer

Asked 4 ´years ago

Question 16

What is the weight of the product? View answer

Asked 4 ´months ago

Question 17

What size unit would I need for 18,000 pool 16 x 32 8 ft deep end 4 ft shallow View answer

Asked 2 ´years ago

Question 18

Rj45+ has power, but not generating View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 19

Can the flow switch be installed upstream of the heater? View answer

Asked 4 ´months ago

Question 20

I have just purchased a gently used RJ30 s/n 025157. I need a good picture of the 240v connections inside View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 21

16x32 x 5what size system do I need View answer

Asked 3 ´years ago

Question 22

Can I use the RJ30 on a 6000 gallon pool? View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 23

50 and 60 hz or only 60hz?

Asked 3 ´months ago

Question 24

I just purchased RJ60+ System. Is there a maximum flow limit that I shall not exceed for the Salt Cell.? Maximum flow, for example 85 GPM, for their Salt Cell. View answer

Asked 3 ´years ago

Question 25

What size do I go with? My pool is 18 by 36 inground with a 4 foot shallow end and 9 feet in deep end which is gradual. Why would I choose one system over another?? What are your recommendations? I do not currently have a salt system View answer

Asked 3 ´years ago

Question 26

I originally bought a RJ-60 plus system. Can I use a RJ-45 plus replacement cell with it? View answer

Asked 2 ´years ago

Question 27

I have a 25000 gal. Gunite pool and live in Maryland. Would you recommend the 40 or 65 model for maximum efficiency. Also can the control panel be mounted outside and is it waterproof View answer

Asked 3 ´years ago

Question 28

I see the electronics are different, but is the cell physically the same length at the Hayward, making the plumbing upgrade a piece of cake? View answer

Asked 4 ´years ago

Question 29

Does it need to be connected to 120v or 240v? View answer

Asked 3 ´years ago

Question 30

Is there a specific flow direction for the RJ-45 plus electric cell? View answer

Asked 3 ´years ago

Question 31

I am replacing a rj30. Is the control mounting bracket the same? View answer

Asked 3 ´years ago

Question 32

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 4 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 33

The control panel on my RJ plus does not cycle through the menu. View answer

Asked 3 ´months ago

Question 34

Universal 40 VS RJ45 Are they both titanium? I’m replacing a Hayward gold line controller and cell . Are the cell lengths the same on both Thanks View answer

Asked 3 ´years ago

Question 35

My pool currently has a sand filter, will this be compatible? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool® RJ-30 PLUS Salt Chlorine Generator

Question 36

what are dimensions of control box. RJ-30 I want to mount it on the circuit breaker panel. View answer

Asked 2 ´years ago

Question 37

I have 1 -1/2" pipe 44gpm Hayward filter and Hayward pool heater. Will this work easily with these things?? View answer

Asked 3 ´years ago

Question 38

Can I replace my old RJ salt system which has a different shaped cell with this one? View answer

Asked 2 ´years ago

Question 39

Can i use rj-45 for a 10000 gallon pool. My neighbor sold his house before he got to instill it on his pool. View answer

Asked 3 ´years ago

Question 40

What size plumbing is this compatible with? View answer

Asked 2 ´years ago

Question 41

What size RJ generator system would you recommend ??? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 42

Is it product partial to leave the unit powered 24-7 ? I recently purchased a variable speed pump which leaves the unit on displaying various lights…I realize the flow switch controls the Cell but I dont want to unnecessarily damage the unit by leaving it powered 24-7 View answer

Asked 3 ´years ago

Question 43

What determins when your RJ+45 Series" goes into it's "REST Cycle"? View answer

Asked 5 ´years ago

Question 44

How often do you have to replace the salt cells? I see no mention of longevity View answer

Asked 4 ´years ago

Question 45

Does the control module have to be covered or is it waterproof? View answer

Asked 4 ´years ago

Question 46

Cell connection View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 47

Concerning your RJ-20 System, I am close to the beach and a very corrosive environment, what is the rating on your control box and how does it stand up in salty conditions? View answer

Asked 3 ´years ago

Question 48

Flow sensor warranty? View answer

Asked 9 ´months ago

Question 49

Cell connection issues View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 50

We just cleaned our cell and now we are having issues with it communicating to the system. There is a code saying Cell Connection. We have inspected the all of the cables and everything look to be in good shape. We have powered it down several times and disconnected it several times as well yet we can not get the cell to communicate with the system, W”hat could be the cause of this code? View answer

Asked 4 ´years ago

RJ PLUS Series Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools