RJ PLUS Series Q&A

Question 1

How do I get the CircuPool® RJ60 Classic Replacement Cell (Electrode Only) into my Circupool RJ 60+ housing? View answer

Asked 9 ´months ago

Question 2

I have a 25000 gal. Gunite pool and live in Maryland. Would you recommend the 40 or 65 model for maximum efficiency. Also can the control panel be mounted outside and is it waterproof View answer

Asked 3 ´years ago

Question 3

What size do I go with? My pool is 18 by 36 inground with a 4 foot shallow end and 9 feet in deep end which is gradual. Why would I choose one system over another?? What are your recommendations? I do not currently have a salt system View answer

Asked 3 ´years ago

Question 4

What size unit would I need for 18,000 pool 16 x 32 8 ft deep end 4 ft shallow View answer

Asked 3 ´years ago

Question 5

What are the dimensions of the RJ-45 cell and flow switch? I need to confirm if I have enough piping. Thank you View answer

Asked 3 ´years ago

Question 6

Can you have too big of a chlorinator? View answer

Asked 3 ´years ago

Question 7

I have a timer on my pump. Does the generator need to be on a timer also or is it ok to just let the flow switch shut down the unit when the pump is off? View answer

Asked 3 ´years ago

Question 8

My pool is 56k gallons. What do you recommend? If two, run inline or parallel? View answer

Asked 2 ´years ago | Sales

Question 9

What is the max amp draw of this unit? I am trying to decide if I should add it to my pump circuit or add a new circuit and if the latter than size the circuit. View answer

Asked 3 ´years ago

Question 10

What determins when your RJ+45 Series" goes into it's "REST Cycle"? View answer

Asked 6 ´years ago

Question 11

Recommended set up on rj45 plus on 22000 gallon pool. Variable speed pump. Pump run time and percentage setting. Thanks View answer

Asked 5 ´years ago

Question 12

Just received it, and so psyched to replace my 18 year old Aquarite, it looks great. Can I keep the old flow switch from that system that still works fine, or do I need to swap in the new one. Just looking for simplicity in the install. Thanks, View answer

Asked 4 ´years ago

Question 13

We just cleaned our cell and now we are having issues with it communicating to the system. There is a code saying Cell Connection. We have inspected the all of the cables and everything look to be in good shape. We have powered it down several times and disconnected it several times as well yet we can not get the cell to communicate with the system, W”hat could be the cause of this code? View answer

Asked 4 ´years ago

Question 14

Do you offer extensions/adapters for the rj cell to connect to the power supply box? My power wall is about 6 feet farther than the provided cables length. Can I use a standard adapter to extend this? View answer

Asked 4 ´years ago

Question 15

How often do you have to replace the salt cells? I see no mention of longevity View answer

Asked 4 ´years ago

Question 16

Operating a R 45 Circu pool salt Chlorinator View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 17

Does the control module have to be covered or is it waterproof? View answer

Asked 4 ´years ago

Question 18

What is the warranty? I don’t see any info here. View answer

Asked 4 ´years ago

Question 19

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 3 ´years ago

Question 20

We have a RJ 45 and a pool with just under 14,000 gal. Once Chem levels are achieved how much salt should need to be added to maintain them. It is an indoor pool. View answer

Asked 3 ´years ago

Question 21

I just ordered an RJ-45+. Should I install a check valve after the heater? View answer

Asked 3 ´years ago

Question 22

max amperage draw at 220v View answer

Asked 4 ´years ago

Question 23

Does this generator cell plug up with calcite quicker/more readily than the CORE? We have very hard water and very high temperatures, View answer

Asked 4 ´years ago

Question 24

What is the minimum required flow (in GPM) for the RJ60+ Flow Switch to close and enable the Salt Cell to generate Chlorine? View answer

Asked 3 ´years ago

Question 25

Will the system say when it’s time to change the cell? View answer

Asked 5 ´years ago

Question 26

Cell not match View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 27

I just installed an RJ60+ in place of my Aquapure 1400. I was just wondering- on the unit, there is a “remote” indicator. What is this for? Are there ways to adjust the unit remotely, perhaps interfacing it with the Jandy system? Thanks. View answer

Asked 5 ´years ago

Question 28

Is there a place where i can get actual dimensions? Like a shop drawing. Ive already managed to rule out the CORE55 from rough dimensions given to another. I suspect this model will be a much more close call on fitting. View answer

Asked 5 ´years ago

Question 29

Hello, I have just purchased the RJ-30 Plus Salt system, and wanted to know it's power usage in Watts and Amps. Also, is it more efficient to connect it to 220v vs. 120v, and if so, how much more efficient? Whats the amperage & wattage for 220v vs. 120v connections? Thank you! View answer

Asked 4 ´years ago

Question 30

I just purchased RJ60+ System. Is there a maximum flow limit that I shall not exceed for the Salt Cell.? Maximum flow, for example 85 GPM, for their Salt Cell. View answer

Asked 3 ´years ago

Question 31

What is the RJ+ cell unit's maximum pressure (PSI) rating? View answer

Asked 3 ´years ago

Question 32

How do I shock my salt water pool that has a RJ60+ system. View answer

Asked 3 ´years ago

Question 33

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 5 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 34

what are dimensions of control box. RJ-30 I want to mount it on the circuit breaker panel. View answer

Asked 2 ´years ago

Question 35

eco pump leafpumps.com/ low flow seems enough for flowswitch but not for cell. View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 36

how acccurate is the control unit salinity reading? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 37

What size RJ generator system would you recommend ??? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 38

What size plumbing is this compatible with? View answer

Asked 2 ´years ago

Question 39

Do I need to register my new system and if so, where do I register it at? View answer

Asked 1 ´year ago

Question 40

Can I replace my old RJ salt system which has a different shaped cell with this one? View answer

Asked 2 ´years ago

Question 41

My pool currently has a sand filter, will this be compatible? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool® RJ-30 PLUS Salt Chlorine Generator

Question 42

Cell Connection error after power on/off won't go away View answer

Asked 2 ´years ago

Question 43

I originally bought a RJ-60 plus system. Can I use a RJ-45 plus replacement cell with it? View answer

Asked 2 ´years ago

Question 44

RJ-60 Plus does the direction of flow through the cell matter? View answer

Asked 2 ´years ago | Support

Question 45

Should the power cord from control box to timer be routed in conduit? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 46

What do I do when the cell maintenance light is on my CircuPool RJ45+ salt chlorine generator? View answer

Asked 2 ´years ago

Question 47

Do you make an extension cable for the rj 45 cell? View answer

Asked 2 ´years ago

Question 48

Will the generator be compatible with my infinity i40 salt cell View answer

Asked 3 ´years ago

Question 49

Rj45+ has power, but not generating View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 50

7 month old system and no chlorine View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

RJ PLUS Series Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools