RJ PLUS Series Q&A

Question 1

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 2

We have a RJ 45 and a pool with just under 14,000 gal. Once Chem levels are achieved how much salt should need to be added to maintain them. It is an indoor pool. View answer

Asked 3 ´years ago

Question 3

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 3 ´years ago

Question 4

Does the control module have to be covered or is it waterproof? View answer

Asked 4 ´years ago

Question 5

We just cleaned our cell and now we are having issues with it communicating to the system. There is a code saying Cell Connection. We have inspected the all of the cables and everything look to be in good shape. We have powered it down several times and disconnected it several times as well yet we can not get the cell to communicate with the system, W”hat could be the cause of this code? View answer

Asked 4 ´years ago

Question 6

The power button does not respond. Can I fix it? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 7

Just received it, and so psyched to replace my 18 year old Aquarite, it looks great. Can I keep the old flow switch from that system that still works fine, or do I need to swap in the new one. Just looking for simplicity in the install. Thanks, View answer

Asked 4 ´years ago

Question 8

I have a RJ-45 Plus Salt Generator. I don't know what the winter mode button actually does and what it's usefulness is. The owners manual really doesn't describe it's function or why it should or should not be used. View answer

Asked 4 ´years ago

Question 9

My old Hayward Aquarite was vertical with no flow switch needed. Do I need one for the RJ45? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool® RJ-45 PLUS Salt Chlorine Generator

Question 10

Recommended set up on rj45 plus on 22000 gallon pool. Variable speed pump. Pump run time and percentage setting. Thanks View answer

Asked 5 ´years ago

Question 11

I soaked the cell in the muratic acid solution for 10’ but there are still mineral deposits visible on both ends View answer

Asked 1 ´year ago

Question 12

I HAVE AN RJ60 UNIT , 2 YRS OLD , WHEN I PRESS THE SALINITY BUTTON = NO RESPONSE , ONLY WITH MENU View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 13

How do I change the ATO fuse? View answer

Asked 1 ´year ago

Question 14

How should I store my salt chlorinator in the winter months? View answer

Asked 12 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 15

Rj45+ has power, but not generating View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 16

Why does display show temp high message when trying to adjust chlorinator? Our water temperature is around 83 View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 17

Is the 15000 hr lifespan at a 100% duty cycle? View answer

Asked 2 ´years ago

Question 18

How do you convert a CircuPool RJ PLUS from 220 to 110? View answer

Asked 1 ´year ago

Question 19

High salt View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 20

Flow switch View answer

Asked 1 ´year ago

Question 21

Do I need a fuse reset button or a new fuse? RJ+ 60 model. View answer

Asked 2 ´years ago

Question 22

I purchased this system 2 yrs ago. My pump is not working and showing an E-09 error. Can you please help. Thanks. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 23

Just got the unit, any difference using 240v or 120v in performance?, can I use 120v wifi switch to connect it? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 24

no flow light View answer

Asked 1 ´year ago

Question 25

Brand new rj30 won’t read salinity and cell amps read zero at max power View answer

Asked 1 ´year ago

Question 26

Do I need to register my new system and if so, where do I register it at? View answer

Asked 1 ´year ago

Question 27

my system is several years old. I just started it up and it says cell no match?? View answer

Asked 1 ´year ago

Question 28

I divert water to my deck jets and pool slide. Does it hurt the system to have the pump on & no water going to salt View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 29

how acccurate is the control unit salinity reading? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 30

no power on unit View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 31

My screen is not working View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 32

I have a 14k gallon pool and an RJ45+ system. What setting should I put it on? I have it at 50% now. View answer

Asked 1 ´year ago

Question 33

My systems flow switch light is staying on. It is a brand new system, just plugged it in today. View answer

Asked 1 ´year ago

Question 34

My RJ30+ was professionally installed, three weeks ago. It appears it is running. BUT it is not generating chlorine. View answer

Asked 1 ´year ago

Question 35

We just bought our house and the panel won’t turn on at all. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 36

How can I tell when my electrolytic cell is bad? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 37

My RJ45 control module shows cell volts 12.2 cell Amps 0.00A, power is set at MAX. Salinity shows Average:0000 View answer

Asked 1 ´year ago

Question 38

if set below 70% my generator stops generating. i shut off and turn on it starts generating then stops again View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 39

flow switch View answer

Asked 1 ´year ago

Question 40

Generating stuck on 50% will not adjust View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 41

I am experiencing a lack of chlorine being generated but cell parameters seem correct. Solution? View answer

Asked 1 ´year ago

Question 42

I have never seen a positive current reading from the menu. What's wrong? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 43

How do you access the Internal jumpers View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 44

Salt level is normal but chlorine level is low. What can cause this? View answer

Asked 4 ´months ago

Question 45

What is the difference between the RJ vs the SJ series? View answer

Asked 6 ´years ago

Question 46

what is the length of it? How long of a span of tubing is needed to be cut out for install? View answer

Asked 5 ´years ago

Question 47

We bought this system 3 or so yrs ago, and none of the buttons work on the unit. What should we do View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 48

Is it safe to keep control module powered up if pool pump is off(no water flow)? View answer

Asked 2 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 49

I have an RJ PLUS cell. Can I test it on a Hayward test unit? View answer

Asked 2 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 50

I have the RJ 30 plus. can i replace the cell with the Rj + 45 cell replacement View answer

Asked 3 ´months ago

RJ PLUS Series Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools