Ask a Question

Ask your question here...

Home
Login
Register

Search...

Sanitation > Salt Chlorinators > RJ PLUS Series >

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources Q&A

Filter

Activity timeframe

Apply filters

Questions

Most Popular

Recently Asked

Recently Active

Do I use the setting +30 or -30 for the RJ plus 30? View answer

Asked 11 ´months ago

What is the return policy if the cell is not the fix and I need to buy another complete system? View answer

Asked 11 ´months ago

Flow switch View answer

Asked 12 ´months ago

Stops generating after a few hours of running. Turn it off and on and back to normal. View answer

Asked 12 ´months ago

Yellow cell maintenance light View answer

Asked 11 ´months ago

Reported Temperature is high. View answer

Asked 1 ´year ago

My Low flow light is on, I cleaned the cell, and it’s still on. What’s next View answer

Asked 1 ´year ago

No amps View answer

Asked 11 ´months ago

Cell not match View answer

Asked 1 ´year ago

Screen shows cell connection View answer

Asked 1 ´year ago

Low salt light View answer

Asked 1 ´year ago

Temperature readings over 110. Replaced flow switch. Temp readings still over 110. What should I do? View answer

Asked 1 ´year ago

Can the RJ30 system be installed at a 45 degree angle? View answer

Asked 1 ´year ago

What is the typical life of a salt cell? View answer

Asked 1 ´year ago

NO SALINITY READING WHEN BUTTON PUSHED ON RJ30 PLUS View answer

Asked 1 ´year ago

How do I change the ATO fuse? View answer

Asked 1 ´year ago

Just installed a new Circupool RJ60 no flow light is on View answer

Asked 1 ´year ago

Does the RJ30+ need to be recalibrated..if so how? View answer

Asked 1 ´year ago

I HAVE AN RJ60 UNIT , 2 YRS OLD , WHEN I PRESS THE SALINITY BUTTON = NO RESPONSE , ONLY WITH MENU View answer

Asked 1 ´year ago

Can the unit be installed vertically? View answer

Asked 1 ´year ago

My CircuPool RJ PLUS salt chlorinator lights up and then turns back off. View answer

Asked 1 ´year ago

"Cell Connection" frozen on the screen. What can I do? View answer

Asked 1 ´year ago

No keys on controller respond and display reads "cell connection." View answer

Asked 1 ´year ago

Why does my display say "LOW TEMP" and not generating....says water temp is 46 degrees and my Jandy says its 78 deg View answer

Asked 1 ´year ago

I cleaned my r 40 cell and it still reads cell maintenance View answer

Asked 1 ´year ago

What size breaker is needed for a RJ45 ? Can I tie the pump and rj45 together? The 3 hp circuit pump says to not View answer

Asked 1 ´year ago

My pool's pump is off with power to the RJ-30. is that OK? View answer

Asked 1 ´year ago

How to program the RJ-30 to turn on and off? Is there a way to program the system? View answer

Asked 1 ´year ago

Low Chorine View answer

Asked 1 ´year ago

noise View answer

Asked 1 ´year ago

The power button does not respond. Can I fix it? View answer

Asked 1 ´year ago

We have a 60000 gal pool at our yacht club View answer

Asked 1 ´year ago

Does it hurt the salt generator to be running when the pump is off and no water going through? View answer

Asked 1 ´year ago

I have a high water temp message on the display. What needs done to fix this? View answer

Asked 1 ´year ago

Is there a way to set run time limit? View answer

Asked 1 ´year ago

The generator won’t go above 50%. I click the “+” but it stops at 50% View answer

Asked 1 ´year ago

When adding salt for maintenance reasons should I turn off the SWG for a period of time? View answer

Asked 1 ´year ago

Is there a cap to clean the cell View answer

Asked 1 ´year ago

control panel will not go higher than 50% View answer

Asked 1 ´year ago

Where can I find the CircuPool serial number on my equipment?? View answer

Asked 1 ´year ago

Readout says "cell not match" also the system will not power off...none of the buttons work ...help. View answer

Asked 1 ´year ago

Reading on unit says cell not match.. View answer

Asked 1 ´year ago

Cell not match View answer

Asked 1 ´year ago

Temperature sensor incorrect View answer

Asked 1 ´year ago

RJ60+ reading a voltage (around 28) but zero salinity and amps View answer

Asked 1 ´year ago

I have an RJ-45 that has been working fine for about 2 years but now indicated "Cell Connect". View answer

Asked 1 ´year ago

I soaked the cell in the muratic acid solution for 10’ but there are still mineral deposits visible on both ends View answer

Asked 1 ´year ago

Why not sell the flow switch with the Tee? But you you show the sensor with the tee to sell the sensor. View answer

Asked 1 ´year ago

My RJ 45 unit the screen is showing me no amperage what could be the cause View answer

Asked 1 ´year ago

High salt View answer

Asked 1 ´year ago

Show: Select how many pieces of content to show

View More Product Details

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Learn how to get the most out of your RJ-Series Salt System

View Details

Related Product

CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Learn how to get the most out of your RJ-Series Salt System

View Details

Browse by Topic

Sales
Sales
Support
Support
Other
Other

Tools

Help

Search...

Home | Terms & Conditions | Help

Please wait...