Question 1

I currenty have a aquapure 1400 that I am really dissatisfied with. I just changed the cell and it is still sporadic with error messages. I can’t believe I just bought a cell for $700.00 and nothing! Is this system a direct bolt on? I don’t want to continue throwing money at this problem. The pool size is 18,000 gallons and I live in Miami, Fl. Which is hot! View answer

Asked 4 ´years ago

Question 2

Only number two polarity comes on View answer

Asked 4 ´years ago

Question 3

Looking at the circupool smartflo variable speed pump (1.5 Hp). What is the frame sizing of the motor, 48 or 56 frame? View answer

Asked 4 ´years ago

Question 4

Did this take the place of the SGS salt system? View answer

Asked 4 ´years ago

Question 5

I just installed an RJ60+ in place of my Aquapure 1400. I was just wondering- on the unit, there is a “remote” indicator. What is this for? Are there ways to adjust the unit remotely, perhaps interfacing it with the Jandy system? Thanks. View answer

Asked 4 ´years ago

Question 6

What is the water flow direction thru the cell View answer

Asked 4 ´years ago

Question 7

is this for in ground pools? View answer

Asked 4 ´years ago

Question 8

Does the RJ45 refer to pool size (45,000 Ga's) or does the 45 represent the element output in grams per hour? View answer

Asked 4 ´years ago

Question 9

What is the grams per hour output of the RJ45? View answer

Asked 4 ´years ago

Question 10

Is this the right 2" union for a RJ +? View answer

Asked 4 ´years ago

Question 11

Is this salt cell compatible with a 2004 Hayward Goldline Aqua-Logic system? It says (when I hit the configuration switch 7 times) that it uses "Main Program 2.32". View answer

Asked 4 ´years ago

Question 12

Not sure what cell I need for proper replacement ? View answer

Asked 4 ´years ago | Replacement Cells > RJ-Classic Replacement Cells

Question 13

Does this o ring fit the 2" union? View answer

Asked 4 ´years ago

Question 14

Is this compatible with Hayward Goldline Turbo Cell T-Cell-15 ? View answer

Asked 4 ´years ago

Question 15

Brand new aqua rite led no working,only display? View answer

Asked 4 ´years ago

Question 16

I am considering the Core55 replacing an a pure 1400 salt cell. Will this adapter work to replace the salt cell? View answer

Asked 4 ´years ago

Question 17

I read somewhere that I would need to get a core model for twice the size of my pool. I have a 22k gallon pool so with that logic I would need a core55. Also is there anything else I need to hardwire into my existing timer or should I get a new timer? View answer

Asked 4 ´years ago

Question 18

I have received two of these cells from a CircuPool dealer and both of them will not thread onto my CircuPool RJ60+ union collars. They will thread onto the cleaning stand. Has CircuPool changed the suppliers recently, or changed the threads on one or the other? View answer

Asked 4 ´years ago | CircuPool® Bypass Cell for RJ-PLUS and UL-Series Salt Systems

Question 19

I currently have a zodiac lm2-24 salt chlorinator. Does the Circupool sj-40 mount on the same plumbing? (i.e., have the same dimensions for its fittings? )or will I have to re-engineer the existing pvc? View answer

Asked 4 ´years ago

Question 20

will the cleaning stand nut replace a cracked one on my salt cell? CIRCUPOOL® CLEANING STAND FOR CIRCUPOOL RJ, UNIVERSAL, AND SI SYSTEM can the nut with this replace a cracked nut on me cell housing? View answer

Asked 4 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 21

What is the life of this generator? View answer

Asked 4 ´years ago

Question 22

Do you need to connect to a timer or will it turn on automatically when the pool pump is running while connected to the 110v outlet? View answer

Asked 4 ´years ago

Question 23

What are the programming motor speeds?? View answer

Asked 4 ´years ago

Question 24

Can you check my purchase & determines which Chlorine Generator I have?? I need to know if it has a flow meter. Am considering installing a Variable Speed Pump. View answer

Asked 4 ´years ago

Question 25

I have a SI series but don't know, manual doesn't say, if its a 30 or 45? I have a 18,000 gallon pool. is the -30 and -45 the same overall length? Connections to the controller the same? I don't want to replumb the system. Thanks. View answer

Asked 4 ´years ago

Question 26

Is it the exact size so I don't have to alter the plumbing? View answer

Asked 4 ´years ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 27

Can the convertor cell be mounted vertically and the flow detector be mounted on the adjacent horizontal run ? What horizontal straight tube length should precede the flow device along the horizontal tube run ? View answer

Asked 4 ´years ago

Question 28

Will any sand filter work with this system or do i need a newer sand filter? Mine is almost 25 years old. View answer

Asked 4 ´years ago

Question 29

The keypad is showing output-off when I reset by pressing the + key and bring it up to 60 or 80, but in a few minutes or couple hours is back on output-off, Do I need a new keypad or a new circuit board? thank you View answer

Asked 4 ´years ago

Question 30

Do I need this and how does it work.? is it connected to any thing like water or just a stand? View answer

Asked 4 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 31

Will this work on 24 round above ground pool that is 5 ft deep ? View answer

Asked 4 ´years ago

Question 32

Does this also come with the cord to plug it into the control box? It does not show on the picture View answer

Asked 4 ´years ago | Replacement Cells > Si-Series Replacement Cells

Question 33

I like the core55. I am currently a no salt pool and would like to switch with this system. However, my pool is 54,000 gallons. Can I install the core55 with any the core35 and meet my needs? View answer

Asked 4 ´years ago

Question 34

Hi, if down the road the pump needs maintenance or replacing is there a way to replace the pump motor only? Not the electronics? Do you sell these parts? View answer

Asked 4 ´years ago

Question 35

I'd like to verify the size of these -rings before I order: diameter and thickness. I need to replace the O-rings on the unions for my circupool salt cell. I purchased the RJ30N "plus" unit in April, 2016.Can you provide the dimensions please? View answer

Asked 4 ´years ago

Question 36

what is the difference in one cell to another if the computer system is the same? in other words, would say an SJ- 45 be the same as an SJ-30 as far as functionality View answer

Asked 4 ´years ago

Question 37

Our GRC/J1400-3 chlorine generator has failed. Looking for a direct replacement so the pipes don't need to be changed. Is this model applicable? Thanks View answer

Asked 4 ´years ago

Question 38

Will this cable extend a Heyward T15 cell cable? I need more than the provided 15 feet View answer

Asked 4 ´years ago

Question 39

I just ordered a CircuPool SmartFlo Variable Speed Pool Pump - 3.0 THP . While visiting the website I find Part Number:CIR-SF3.0P-CM. My question is - is this an extension controller for the pump I just purchased? View answer

Asked 4 ´years ago

Question 40

we just recently bought this product and have questions. Is there a customer service department we can speak to? View answer

Asked 4 ´years ago

Question 41

Just wanted to confirm that this would easily replace the T-Cell Aqua-rite with no additional calibration or other. Also, If I order today when should I expect it to be delivered to MN? View answer

Asked 4 ´years ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 42

How do I open my housing to replace this cell? View answer

Asked 4 ´years ago | Replacement Cells > RJ-Classic Replacement Cells

Question 43

Have an old RJ60. Does this replacement include both plastic housing and electrode? My plastic housing does not appear to be able to open to insert a new electrode View answer

Asked 4 ´years ago | Replacement Cells > RJ-Classic Replacement Cells

Question 44

Standard overall needed space for installation? And can it be installed vertically? View answer

Asked 4 ´years ago

Question 45

do you make a cart compatible with the swim drone? View answer

Asked 4 ´years ago | Cleaners > CircuPool® SwimDrone - Robotic Swimming Pool Cleaner

Question 46

Hola Im interested in the vacuum cleaner,Is it available? View answer

Asked 4 ´years ago | Cleaners > CircuPool® SwimDrone Pro - Robotic Swimming Pool Cleaner

Question 47

I have an RJ Classic system with an old tired RJ-20 salt cell. I have an RJ-30 salt cell that I want to use with the controller but I can't find a menu option to specify cell size. I noticed the display board inside has a push button. Is that a reset/initialize button or is their some hidden menu option for setting the cell size? thanks View answer

Asked 4 ´years ago | Replacement Cells > RJ-Classic Replacement Cells

Question 48

Can this be used for 2 things ( pump and salt chlorinator) ? View answer

Asked 4 ´years ago | Replacement Parts > Parts & Accessories > Heavy Duty Outdoor Programmable Timer (110V)

Question 49

Is this a set or do I need to order 2? View answer

Asked 5 ´years ago

Question 50

what is the length of it? How long of a span of tubing is needed to be cut out for install? View answer

Asked 5 ´years ago

Browse by Topic

Tools