Sanitation Q&A

Question 1

I am getting ready to install this unit but may have to install it vertically. What, if anything, do I need to do to insure the system works properly? Thanks, Marty View answer

Asked 3 ´years ago

Question 2

What are the dimensions of the steel cabinet? View answer

Asked 3 ´years ago

Question 3

my old cell housing is leaking so i need to replace it. i ordered a new one which has treaded connectors but the existing housing was glued to the PVC . What parts do I need to connect the new housing unit? I have a SJ View answer

Asked 3 ´years ago

Question 4

How do I winterize with this system. View answer

Asked 3 ´years ago

Question 5

I live in the Northeast. For winter do I disconnect the system from the PVC pipe and store it? Or can it handle the winter elements? View answer

Asked 3 ´years ago

Question 6

Can this be left to plug-in? The outlet at my pump box is not on the timer but the pump is on a timer. Or do I need to add a timer to the outlet? View answer

Asked 3 ´years ago

Question 7

How difficult is it to convert a chlorine tablet system to the Circupool SJ~20 system? Is the conversion similar to the one you use to convert from one salt system to the circupool product. Thanks View answer

Asked 3 ´years ago

Question 8

How important to place Core35 after the heater? The heater is about 8 feet from the filter but all the plumbing is underground and the wiring will be a longer distance than desired. This will cause me lots of work on new plumbing. I can easily place it between the filter (pool return) and the heater (which we rarely use in Florida). It this acceptable? View answer

Asked 3 ´years ago

Question 9

I am replacing a rj30. Is the control mounting bracket the same? View answer

Asked 3 ´years ago

Question 10

Universal 40 VS RJ45 Are they both titanium? I’m replacing a Hayward gold line controller and cell . Are the cell lengths the same on both Thanks View answer

Asked 3 ´years ago

Question 11

Can you use a timer to turn the rj30 on and off? View answer

Asked 3 ´years ago

Question 12

are the input and output connections 1 1/2 or 2'' View answer

Asked 3 ´years ago

Question 13

I need to purchase a new system, is there anywhere I can look at how this is installed to see what I need to do if I replace by Frog system with this one. View answer

Asked 3 ´years ago

Question 14

how long does the edge 15 need to be run to meet the advertised chlorine rate per day? View answer

Asked 3 ´years ago

Question 15

can it connect to a smart phone? View answer

Asked 3 ´years ago

Question 16

Can this be used for an 8’x8’ below ground hot tub? View answer

Asked 3 ´years ago

Question 17

How can you check if the cell is working. Thanks View answer

Asked 3 ´years ago

Question 18

What is the face to face dimension for the water in-out ports. Looking to directly replace inline chlorinator if possible. View answer

Asked 3 ´years ago

Question 19

How many amps does my CircuPool SJ pull? View answer

Asked 3 ´years ago

Question 20

Hi, I have a pool of 22.000 gallons with a pump pentair of 2 HP SF-N1-2A (85 GPM Aprox). If I Installed a Universal 40 how many hours a day I must turn on the system ?. I live in Colombia and the temperature of the water is about 84 F. When you talk about 2.0 lb, how many working hours it means ? Regards, Diego. View answer

Asked 3 ´years ago

Question 21

How can I tell if my cell is not working? Normally it bubbles when in use. View answer

Asked 3 ´years ago

Question 22

I currently have a Jandy saltwater system and I am looking to replace it with something that actually works. Can you tell me what product would make sense to work with my Jandy system and work for my pool size (about 35,000 gallons) Thanks View answer

Asked 3 ´years ago

Question 23

Any estimate on when the SJ-35 will be back in stock? View answer

Asked 3 ´years ago

Question 24

I see the flow switch is integrated into the replaceable cell. Can it be repaired without replacing the entire cell? It seems flow switches are the weakest link with Pentair. While I like this system, I'm a little apprehensive. View answer

Asked 3 ´years ago

Question 25

Is there a specific flow direction for the RJ-45 plus electric cell? View answer

Asked 3 ´years ago

Question 26

I have a 15,000 gallon pool with a 3 year old waves/breeze unit that needs to be replaced. Just will not generate chlorine since install. Will this unit provide the correct chlorine and sanitizer needed for this size pool View answer

Asked 3 ´years ago

Question 27

Our pool has 6500 gal. and I think the CORE15 model should have the right size. 1. When do I have to change the cell for the first time? and 2. what means 8 years "limited"? Thank you, Thomas View answer

Asked 3 ´years ago

Question 28

Does it need to be connected to 120v or 240v? View answer

Asked 3 ´years ago

Question 29

Can you use the flow switch from my Hayward system or do I have to change it? Also what would be the shipping time after I order? Universal 40 View answer

Asked 3 ´years ago

Question 30

How easy are is the SJ 35 to clean and how often does it need clening. View answer

Asked 3 ´years ago

Question 31

Do I need to install a check valve before the CORE35 to prevent superchlorinated water backflowing into my system when the pool pump is turned off? View answer

Asked 3 ´years ago

Question 32

I reversed the cleaning amounts using more acid than water. Did i destroy the unit ? View answer

Asked 3 ´years ago

Question 33

Will the core55 fit right in the return line where the current Hayward CL200 3" tab chlorine is feeder is? Almost looks like it will. View answer

Asked 3 ´years ago

Question 34

I need replacement o- rings for this chlorinator. Do you sell then. and if so, how much are they? View answer

Asked 3 ´years ago

Question 35

The Core-55 capacity is listed at 2.3 lbs/day. Is the "day" in this calculation 24 hours of runtime will produce 2.3 lbs or is the number of hours smaller? I realize the 2.3 lbs is an approximation...just curious about the required runtime to get the output. View answer

Asked 3 ´years ago

Question 36

Can this replace my intellichlor ic60 or does it require replumbing? How soon can I get it? View answer

Asked 3 ´years ago

Question 37

Can this be installed at a diagonally? View answer

Asked 3 ´years ago

Question 38

I’m thinking about changing over to a SWJ system, mainly due to issues with chlorine this year. Looking at a UL40.. 1) at 120v, how many amps does it pull? 2) does the plug in model need to be on a timer with the pump? Or is it smart enough to not work when there is no flow? 3) what are dimensions of the control box? View answer

Asked 3 ´years ago

Question 39

whats the difference between the core 35 and rj series? View answer

Asked 3 ´years ago

Question 40

What is the warranty? I don’t see any info here. View answer

Asked 3 ´years ago

Question 41

CircuPool product under serious consideration. Long time pool owner. 16x34 with diving end rectangular pool so I est. about 25,000 gals. DIY installation and controller can be in or out (exposed to all sun & elements). Can you suggest a good model for me? Thanks View answer

Asked 3 ´years ago

Question 42

Can this be used as an initial conversion kit? Meaning I don't have a salt system can I install this product? Thanks View answer

Asked 3 ´years ago

Question 43

What is the optimum Salt content for this unit. I think its referred to as Parts per million (PPM) Thank You View answer

Asked 3 ´years ago

Question 44

When will SJ-20 system be available? View answer

Asked 3 ´years ago

Question 45

The description says this can be installed horizontally or vertically but then the website shows a ventricle installation kit. Does this mean the unit as purchased cannot be installed vertically out of the box? View answer

Asked 3 ´years ago

Question 46

What's the minimum flow required for the Core55? I'm currently at 1700rpm and seeing the no flow light? Any ideas? View answer

Asked 3 ´years ago

Question 47

Are these in stock? My pool is only 8800 gallons. I don’t need the next size up. View answer

Asked 3 ´years ago

Question 48

Hi, Can I use this with my existing pool pump? Do you have it in stock? View answer

Asked 3 ´years ago

Question 49

what are the connection measurements, ie., length, dia. Where does the salt supply go and how long does it last. View answer

Asked 3 ´years ago

Question 50

What is the minimum GPM flow rate required for the Core series? View answer

Asked 3 ´years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools