Universal Series Q&A

Question 1

How do you recalibrate the salt monitoring system View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 2

Will it still generate chlorine with a high salt reading? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > Universal Series

Question 3

My Sr-60 generator failed. The Cell is newer, and should not need to be replaced. How much for a replacement gen View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 4

Does this switch work with an RJ30+ system and is it made into the PVC pipe or does it unscrew out? View answer

Asked 1 ´year ago

Question 5

Flow light stays on does not turn off. Valve is ok and the main power light does not come on. Water flow is good View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 6

When cleaning the cell, does it need to foam or fizzle View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 7

Cell maintenance light will not stop blinking cell is producing chlorine View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 8

Can I use universal 25 chlorinator on above ground pool View answer

Asked 2 ´years ago

Question 9

In what increments can the UL25 SWCG be "tuned"? 1%, 5%, etc? View answer

Asked 2 ´years ago

Question 10

My UL40 states the actual salt level and generating output is higher than what it is when tested at a pool store. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series

Question 11

I am experiencing a lack of chlorine being generated but cell parameters seem correct. Solution? View answer

Asked 2 ´years ago

Question 12

How do I recalibrate my unit for correct salt readings View answer

Asked 3 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 13

CAN YOU USE THIS SALT SYSTEM ON ABOVE GROUND POOLS View answer

Asked 3 ´months ago

Question 14

Up arrow View answer

Asked 3 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 15

My ul40 salt read went from 3300 to 0000 Why? View answer

Asked 4 ´months ago

Question 16

Display is unreadable View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 17

Salt generator does not appear to be working . Cell maintenance stays on even though we’ve clean it with muric acid

Asked 3 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 18

Any videos how to clean circu pool cell? View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 19

My salt is 4482 ppm but the system will not produce chlorine. Its been installed for 2 weeks with no luck in prod

Asked 3 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 20

how to find type of unit cell in my system? View answer

Asked 3 ´years ago

Question 21

Cell maintenance View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 22

I need a completely new salt system. Is this CircuPool Universal40 just a “replacement” or is this the whole salt system itself. View answer

Asked 3 ´years ago

Question 23

Are there any specific instructions for storing in the winter months? Covering? (for CircuPool Universal Series salt chlorinator) View answer

Asked 3 ´years ago

Question 24

With a variable speed pump is it ok to leave the generator powered all the time even when the pump shuts off View answer

Asked 3 ´years ago

Question 25

What is the life of this generator? View answer

Asked 6 ´years ago

Question 26

Chlorine is not being generated. New cell with about 6 months service. Will a problem with the small board not indexing causing this problem? View answer

Asked 4 ´years ago

Question 27

I have an auto clear system will this this work to replace that system. Thanks Scott View answer

Asked 5 ´years ago

Question 28

Hi there, I have a Circupool Si 45 salt cell that has gone bad. Can I replace it with a Si 60 cell instead? Is the size the same for both? I have a 36,000 gallon pool in the Dallas area. Thanks, Anton View answer

Asked 4 ´years ago

Question 29

I have above ground pool 33 foot by 54 inch deep is this the best unit View answer

Asked 5 ´years ago

Question 30

The description says this can be installed horizontally or vertically but then the website shows a ventricle installation kit. Does this mean the unit as purchased cannot be installed vertically out of the box? View answer

Asked 5 ´years ago

Question 31

Can you use the flow switch from my Hayward system or do I have to change it? Also what would be the shipping time after I order? Universal 40 View answer

Asked 5 ´years ago

Question 32

What are the dimensions of the UL 40 and it's flow control unit. (LxW). I'm investigating an acceptable place to install in my existing cholorine system piping. I cannot find this info anywhere on your site. View answer

Asked 4 ´years ago

Question 33

What version should be on the Circupool Module for the SI 30. I believe mine is set on 9. View answer

Asked 5 ´years ago

Question 34

I have a SI series but don't know, manual doesn't say, if its a 30 or 45? I have a 18,000 gallon pool. is the -30 and -45 the same overall length? Connections to the controller the same? I don't want to replumb the system. Thanks. View answer

Asked 6 ´years ago

Question 35

Does the Universal55 have the same threads as Hayward Goldline Aqua Rite? I.e., can I unscrew the Hayward and xxxx in the Universal? Or is it the length that is what makes them 'compatible' per the webpage description? Thanks much. View answer

Asked 4 ´years ago

Question 36

Can this be hard wired in place of my hayward salt generator with a 240v connection? View answer

Asked 4 ´years ago

Question 37

Does this unit come with a plug for 120 vac or is it hard wired? View answer

Asked 4 ´years ago

Question 38

I am looking for a unit to convert my pool to a saltwater pool. I noticed this system says that it is a "replacement" for current systems. What would I need to do to install this as a new system? View answer

Asked 4 ´years ago

Question 39

Is there a regular interval at which polarity is reversed? I run my pump 4 hours per day. When not running there will be no power to the control unit. I'm worried based on my past experience with Zodiac LM that with power being cut, the polarity will be reversed every 4 hours after power up which would be a problem (of course I can run it longer if needed). View answer

Asked 4 ´years ago

Question 40

Is there any reason I cannot use a Universal55 in a 35K gallon pool? Thx View answer

Asked 4 ´years ago

Question 41

My pool is 35k gals does it hurt anything if I go with the bigger 55k unit? Thanks View answer

Asked 4 ´years ago

Question 42

Does the chlorinator need to have water circulating through it continuously? My pool has a timer to run about 8 hours a day. Does the unit need to be oversized for this? View answer

Asked 4 ´years ago

Question 43

if cell maint. light flashes like a strobe light instead of a solid light what does that mean? i have a circupool universal 25 View answer

Asked 5 ´years ago

Question 44

Where can I purchase the cell only for the 40 model ? View answer

Asked 4 ´years ago

Question 45

What is the current draw of the entire system if running on 110VAC? View answer

Asked 5 ´years ago

Question 46

When would this ship? Thank you View answer

Asked 4 ´years ago

Question 47

Is this the complete system. All I need to convert to a salt system from chloriine? View answer

Asked 4 ´years ago

Question 48

Other than warranty, what are the differences between the Universal Series and the RJ Series? View answer

Asked 4 ´years ago

Question 49

I need replacement o- rings for this chlorinator. Do you sell then. and if so, how much are they? View answer

Asked 5 ´years ago

Question 50

Will this control panel work with a Hayward Salt Cell? View answer

Asked 4 ´years ago

Universal Series Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools