Question 1

Please provide the measurements of the filter case and the filter cartridge? thanks View answer

Asked 5 ´years ago

Question 2

1.Is there a video showing how to install? 2.Also, I have a 30,000 gallon pool, is it better to oversized the salt chlorinate? 3. I am replacing an existing chlorinator, I am very familiar with working with PVC pipe, is this a DIY project? 4. If I install myself are all warranties still in effect. Thank you View answer

Asked 5 ´years ago

Question 3

I have a below grade equipment room. I was going to install 2- SJ55 on a 50,000 gallon pool. I want the system to coast for longer cell life. What do I need to install the two units below ground? Would it be possible to get a drawing of what you would recommend? View answer

Asked 6 ´years ago

Question 4

I bought a house with a 26qft pool. I'm trying to learn to control the salt chlorinator (SJ series) for my pool. The water is murky now, with algae. All parameters are ok (I check regularly), except chlorine and free chlorine levels, which are at 0. How do I know that the cell actually works? Is there a documentation regarding the controller? the left bottom green light has been blinking. Also, how is this controller related to the pump? I have Hayward controller for the pump, and I'm clueless here too. Please help. View answer

Asked 3 ´years ago

Question 5

How many amps does my CircuPool SJ pull? View answer

Asked 4 ´years ago

Question 6

Can the unit be mounted on its side rather than upright (the intake and output openings upward)? View answer

Asked 4 ´years ago

Question 7

How do I know the CircuPool INDIGO3 ozonater is working on a new install? View answer

Asked 3 ´years ago | Support

Question 8

The Digital Control Panel of the SJ-40 has stopped working how can I fix it? View answer

Asked 5 ´years ago

Question 9

On our second SJ40 and have never used Super CL Mode and would like to know should the light be red.?? We just had the pool redone and need to get the chlorine and salinity back up to where they need to be.......... View answer

Asked 6 ´years ago

Question 10

I have an older RJ 45 model, S/N 30477. Will the SJ 45 fit on my existing plumbing? IE, are the inlet and outlet openings the same distance apart as the RJ? Can you send dimensional specs to me? View answer

Asked 4 ´years ago

Question 11

I need to purchase a new system, is there anywhere I can look at how this is installed to see what I need to do if I replace by Frog system with this one. View answer

Asked 4 ´years ago

Question 12

Is there an adapter kit for a Compupool CPSC36 system? View answer

Asked 4 ´years ago

Question 13

I have an inground pool 13,500 gallon in southwest Florida what size SJ unit will i need ? View answer

Asked 4 ´years ago

Question 14

Circupool SJA flow sensor compatibility View answer

Asked 2 ´years ago | Replacement Parts > Parts & Accessories > SJ-Classic Models > CircuPool SJA Flow Switch (without PVC T-Fitting)

Question 15

The display screen is not working properly View answer

Asked 2 ´years ago

Question 16

HI..MY SALT LEVEL PPM IS 5000. WILL YUR SYTEM STILL GENERATE CLHORILE AT THIS LEVEL? View answer

Asked 5 ´years ago

Question 17

test question on rj20c-rc? View answers

Asked 2 ´years ago

Question 18

I currently have a zodiac lm2-24 salt chlorinator. Does the Circupool sj-40 mount on the same plumbing? (i.e., have the same dimensions for its fittings? )or will I have to re-engineer the existing pvc? View answer

Asked 5 ´years ago

Question 19

What fittings actually come in this "SJ - Hayward/Pentair Cell Adapter Kit"? View answer

Asked 2 ´years ago | Replacement Parts > Parts & Accessories > Brand Adapter Kits > CircuPool® SJ - Hayward/Pentair Cell Adapter Kit

Question 20

Will this replacement cell work with a Hayward Aqualogic controller? Will the Aqualogic be able to read current salt level? View answer

Asked 2 ´years ago

Question 21

Just bought the sj35 and don’t see anywhere in the instructions how long the two risers have to be. How long should they be? View answer

Asked 4 ´years ago

Question 22

Will the plumbing for the SJ20 classic fit with the new SJ series? View answer

Asked 3 ´years ago

Question 23

How long is the cord that connects the cell housing to the control module? View answer

Asked 4 ´years ago

Question 24

Any estimate on when the SJ-35 will be back in stock? View answer

Asked 4 ´years ago

Question 25

I have a 15,000 gallon pool with a 3 year old waves/breeze unit that needs to be replaced. Just will not generate chlorine since install. Will this unit provide the correct chlorine and sanitizer needed for this size pool View answer

Asked 4 ´years ago

Question 26

How easy are is the SJ 35 to clean and how often does it need clening. View answer

Asked 4 ´years ago

Question 27

My flow sensor has failed! Now can I replace just the flow sensor w/out cutting any PVC pipe? View answer

Asked 2 ´years ago | CircuPool® Flow Switch / Temperature Sensor (No PVC Tee Fitting)

Question 28

Does it only work when pump running and does it have a chlorine level reading View answer

Asked 4 ´years ago

Question 29

I have a SJ-series system 4 years ago. works great. I just had a variable speed pool pump installed. It goes threw its own internal timers. does the SJ- series have a built in flow switch sensor built in. Worried about the unit coming on via the old pool timer without the new pump running? View answer

Asked 5 ´years ago

Question 30

Is this compatible for a compupool inlet and outlet hook ups? View answer

Asked 6 ´years ago

Question 31

Hi, I'm a return customer. Well, I think it's time to replace the old system with a new one. My question is... I see a round "white" fitting with wires attached in your photos. What is that? I don't have anything like that on my current system (RJ20 serial # 030282). Also, will the chlorinator fit the same fittings as my old system? Thank You! View answer

Asked 3 ´years ago

Question 32

How difficult is it to convert a chlorine tablet system to the Circupool SJ~20 system? Is the conversion similar to the one you use to convert from one salt system to the circupool product. Thanks View answer

Asked 4 ´years ago

Question 33

When its generating how do you know its producing View answer

Asked 4 ´years ago

Question 34

Only number two polarity comes on View answer

Asked 5 ´years ago

Question 35

How should the SJ-A Control Module unit be wired? View answer

Asked 2 ´years ago

Question 36

I have a pool that has a 15000 gallon capacity will this unit be more efficient? View answer

Asked 5 ´years ago

Question 37

Is this compatible with Hayward Goldline Turbo Cell T-Cell-15 ? View answer

Asked 5 ´years ago

Question 38

Is it the exact size so I don't have to alter the plumbing? View answer

Asked 5 ´years ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 39

Just wanted to confirm that this would easily replace the T-Cell Aqua-rite with no additional calibration or other. Also, If I order today when should I expect it to be delivered to MN? View answer

Asked 5 ´years ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 40

Does this cell work for the sj45 unit or is there a different cell for it ? View answer

Asked 6 ´years ago

Question 41

is the sj40 the same as the sj45 cell? View answer

Asked 5 ´years ago

Question 42

I have a Goldline controller that was installed in 2002. It works fine with the original T-Cell-15. Do you know if this replacement cell will work with a controller from this date? View answer

Asked 5 ´years ago

Question 43

Does the CircuPool replacement cell for Hayward Aqua-rite T-cell-15 work with the 1.40 software, without any modifications? View answer

Asked 6 ´years ago

Question 44

Curious if the items are in stock or on back order please. Looking for the J60 model... And even my pool guy is having a hard time getting it, thank you View answer

Asked 3 ´years ago

Question 45

I bought this to replace an existing RJ-30 classic. Will this work with my existing system? View answer

Asked 3 ´years ago | Replacement Cells > RJ PLUS-Series Replacement Cells

Question 46

Can I replace a SJ 40 cell with and SJ55 utilizing existing SJ40 set-up? Will it actually perform better as I don't appear to be producing salt from existing SJ40 View answer

Asked 6 ´years ago

Question 47

We have a CircuPool system. the controller is S/N 501530. We need a replacement cell electrode. what cell do we order? the SJ-55? View answer

Asked 4 ´years ago

Question 48

What is the life expectancy of these cells? View answer

Asked 3 ´years ago | Replacement Cells > RJ PLUS-Series Replacement Cells

Question 49

Can I use a SJ-55 cell on an original SJ-20 unit? View answer

Asked 4 ´years ago | Replacement Cells > SJ-Classic Replacement Cells

Question 50

What is the part number for the RJ16 salt generator system? View answer

Asked 4 ´years ago | Replacement Cells > RJ PLUS-Series Replacement Cells

Browse by Topic

Tools