Question 1

Can an SJ-35A Replacement Cell be used on an SJ-20A Control Module? View answer

Asked 2 ´years ago

Question 2

Salt cell replacement View answer

Asked 2 ´months ago | Replacement Cells > Aftermarket Replacement Cells fitting Hayward® / Goldline®

Question 3

Does this stand work for the RJ45+ series cells?? Not very clear from the description. Thanks, Mike View answer

Asked 4 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 4

I installed new Gen 15+ cell and my Hayward board fried. Set to 15, worked for a few mins, then blew the board.

Asked 2 ´months ago | Replacement Cells > Aftermarket Replacement Cells fitting Hayward® / Goldline® > CircuPool GEN-Series Aftermarket Replacement Cells - Owner Resources

Question 5

Can I install my Edge40 in a vertical return line? View answer

Asked 2 ´months ago | Replacement Cells > EDGE-Series Replacement Cells

Question 6

Are CORE 35 replacement cells interchangeable with the RJ series? View answer

Asked 2 ´months ago

Question 7

We replace flow switch during last year, and when we started the pool this year, I receive No flow again? View answer

Asked 2 ´months ago

Question 8

CORE Cell Compatibility View answer

Asked 1 ´year ago | Replacement Cells > CORE-Series Replacement Cells

Question 9

Is this cap also applicable tomost other salt cells??? View answer

Asked 4 ´years ago

Question 10

The “Clean Cell” Indicator solid Red even after cleaning. View answer

Asked 1 ´year ago | Replacement Cells > CORE-Series Replacement Cells

Question 11

Does this system use ph probes like acid injection systems to automatically balance the ph View answer

Asked 3 ´years ago

Question 12

My Control Module displays jumbled numbers in System Status menu. View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 13

I need a salt cell for a Si40. Is there a replacement? My serial number is 05BBLAB0DA3EO529. Manu Date 2022/12. View answer

Asked 2 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 14

Is conductive electrical grease used between control board and the clear cell housing on core 35? View answer

Asked 2 ´years ago

Question 15

will the cleaning stand nut replace a cracked one on my salt cell? CIRCUPOOL® CLEANING STAND FOR CIRCUPOOL RJ, UNIVERSAL, AND SI SYSTEM can the nut with this replace a cracked nut on me cell housing? View answer

Asked 5 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 16

When installing RJ60+ with a variable speed pool pump - does it matter which side of the generator the flow switch View answer

Asked 2 ´months ago

Question 17

How to replace bulb View answer

Asked 1 ´year ago

Question 18

Is the Cleaning Cap available for purchase in the UK ? View answer

Asked 4 ´years ago

Question 19

Controller orientation View answer

Asked 3 ´years ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 20

Can the flow switch be installed horizontally and the cell be installed vertically? View answer

Asked 2 ´months ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 21

Where does the gasket go? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 22

Which product would be best for a 33 foot round above ground pool? View answer

Asked 2 ´years ago

Question 23

Do I need this and how does it work.? is it connected to any thing like water or just a stand? View answer

Asked 5 ´years ago | CircuPool® Cleaning Stand for CircuPool RJ Plus, Universal, and Si Systems

Question 24

In the SF1.0P-SCK CircuPool SmartFlo Replacement Strainer Cover Kit, is the plastic window supposed to be loose? View answer

Asked 1 ´year ago

Question 25

Is it safe to keep control module powered up if pool pump is off(no water flow)? View answer

Asked 11 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 26

I have the RJ +45 and it is not generating was just cleaned and salt levels are good. What is wrong?

Asked 1 ´month ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 27

The unit is on and it says says cell connection and none of the buttons are responding and I have powered it off an View answer

Asked 1 ´month ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 28

Does the unlimited combo package come with flow switch or T pipe or do they need to be purchased separately? View answer

Asked 11 ´months ago

Question 29

Can the flow switch be installed upstream of the heater? View answer

Asked 1 ´year ago

Question 30

how long is the warranty View answer

Asked 2 ´years ago

Question 31

The pump seal is bad and the motor is loud despite it only being 2 years old and installed inside of a shed out of

Asked 1 ´month ago | Pumps > SmartFlo VS Pumps > CircuPool SmartFlo Series Variable Speed Pool Pumps - Owner Resources

Question 32

Cell connection View answer

Asked 10 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 33

Not all the sediment is leaving the sediment chamber after using the purge valve. View answer

Asked 11 ´months ago | Support

Question 34

I have swimpure plus, Will it work with it ? View answer

Asked 3 ´years ago | Replacement Cells > Aftermarket Replacement Cells fitting Hayward® / Goldline®

Question 35

Is it okay or advisable to run the ozone generator 24 hours per day? View answer

Asked 1 ´year ago | Sanitation > Ozone Generators > INDIGO3 Series > CircuPool® INDIGO3-XL Ozone Generator for Swimming Pools

Question 36

At what salinity levels does the RJ-60+ stop powering the salt cell? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 37

what are dimensions of control box. RJ-30 I want to mount it on the circuit breaker panel. View answer

Asked 3 ´years ago

Question 38

can the tanks be out in the sun I live in so cal and I t gets hot in Vally I don't have storage View answer

Asked 3 ´years ago

Question 39

Can I purchase just the controller on the SF2.0? Pump works great, but most buttons not responsive.

Asked 1 ´month ago | Replacement Parts > Pump / Filter Models > SmartFlo Pump Parts

Question 40

I have an rj45n-RC that is going bad. Can I simply replace the electrode?? Does the cell housing come apart? View answer

Asked 2 ´years ago

Question 41

What would be the preferred operating setup (to promote cell life): 12 hours at 25% output or 6 hours at 50%? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > CORE Series

Question 42

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 5 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 43

Automation support View answer

Asked 11 ´months ago

Question 44

will the verticle instalation kit work for the UL40 with 1 1/2nch piping? View answer

Asked 1 ´month ago

Question 45

Upgrading from 25 to 55? View answer

Asked 1 ´month ago

Question 46

Are these units using corona discharge? View answer

Asked 2 ´years ago

Question 47

Where can I purchase the wrench for the threaded cell collar ? View answer

Asked 2 ´years ago | Replacement Parts > Parts & Accessories > Si / Universal Models

Question 48

My plumbing uses 1 1/2-inch PVC. If I use 1 1/2 to 2-inch PVC adaptors, are there any known problems I may face? View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > CORE Series

Question 49

I HAVE DISCONNECTED MY UNIVERSAL SERIES FOR THE WINTER BUT MY FLOW SWITCH IS STILL IN MY FUNCTIONING SYSTEM CAN THE SENSOR BE UNSCREWED FROM TOP OF TEE/SWITCH BE TAKEN OUT AND PLUGGED WITH NO PROBLEM View answer

Asked 5 ´years ago | CircuPool® Flow Switch Housing

Question 50

I just ordered a CircuPool SmartFlo Variable Speed Pool Pump - 3.0 THP . While visiting the website I find Part Number:CIR-SF3.0P-CM. My question is - is this an extension controller for the pump I just purchased? View answer

Asked 6 ´years ago

Browse by Topic

Tools