Sanitation Q&A

Question 1

I would like to confirm that the Core55 can be connected to an Pentair EasyTouch and IntelliTouch Pool and Spa System as I believe it can. Will the unit work? View answer

Answer posted 2 years ago

Question 2

My core 55 is only showing one bar and if I increase the bars, it one flashes on another bar. It also says to clean the unit which I have done several times. What can I do to fix the problem. At first, it was working great. View answer

Answer posted 2 years ago

Question 3

I currently have an RG 30 but it doesn’t seem to be reading the salinity levels correctly. I’m wondering if I need to purchase a separate new cell. If so how much would it be?Many thanks Jeff View answer

Answer posted 2 years ago

Question 4

How do I shock my salt water pool that has a RJ60+ system. View answer

Answer posted 2 years ago

Question 5

why does the housing leak? I replaced gasket and it leaks around the threads View answer

Answer posted 2 years ago

Question 6

is there a way to calibrate the cell? salt level in the pool shows to be around 3900 and the display shows salt too low...any help greatly appreciated..thank you... it is a si30 system with a 15000 gallon pool View answer

Answer posted 2 years ago

Question 7

Overall length of salt cell. Also, is it 2 inch tuping in and out, or does it have recucing bushings to change larger size to 2 inch? What's the approximate weight of the salt cell? View answer

Answer posted 2 years ago

Question 8

When do you think this product will be available again? I am converting a 9 person hot tub to saltwater. Would the edge25 be too large for hot tub? View answer

Answer posted 2 years ago

Question 9

Can this chlorinator be added before the filter after the pump ?The existing pool system is very constrained where the water returns to the pool after the filter View answer

Answer posted 2 years ago

Question 10

Is there a replacement for the cell when it finally dies, or do you have to buy the entire system? I am not seeing one on the site. View answer

Answer posted 2 years ago

Question 11

Can I easily replace my jandy 1400 aquapure system with this circupool 40k unit? View answer

Answer posted 2 years ago

Question 12

when there is no electricity, will the device return to work after the power is restored? View answer

Answer posted 2 years ago

Question 13

Are replacement cells readiiy available and how much $ If the flow valve breaks, can it be replaced or is a new cell required. View answer

Answer posted 2 years ago

Question 14

We're thinking of replacing out Hayward with this system. Can we reply on the flow switch to turn the chlorinator on and off? The pump is always powered, but has an internal controller as well as variable speed. We can have reduced flow as well as no flow during parts of the day. Will this hurt your system? Thank you in advance. View answer

Answer posted 2 years ago

Question 15

Can I use this system to lower my PH to 6.9 - 7.0? I have a staining problem and it is advised to lower the Ph to break uip the calcium covering the dirt so it can be vacuumed up View answer

Answer posted 2 years ago | Sanitation > pH Control

Question 16

Do you offer a military discount? View answer

Answer posted 2 years ago

Question 17

I just ordered an RJ-45+. Should I install a check valve after the heater? View answer

Answer posted 2 years ago

Question 18

What is the max amp draw of this unit? I am trying to decide if I should add it to my pump circuit or add a new circuit and if the latter than size the circuit. View answer

Answer posted 2 years ago

Question 19

The Flow LED on the panel will turn green for aprox. 10 seconds and then go red for aprox. 2 min. When it will go green again for 10 seconds repeating. Could this be a faulty flow switch or something else? View answer

Answer posted 2 years ago

Question 20

Does the CircuPool Core 35 come with a sacrificial anode? View answer

Answer posted 2 years ago

Question 21

I have a timer on my pump. Does the generator need to be on a timer also or is it ok to just let the flow switch shut down the unit when the pump is off? View answer

Answer posted 2 years ago

Question 22

i HAVE A 25,000 GAL POOL WILL THE CORE35 BE SUFFICIENT? View answer

Answer posted 2 years ago

Question 23

Can we get an adapter kit for a pentair ic 40 View answer

Answer posted 2 years ago

Question 24

Will the universal 40 cell fit the t-15 directly. View answer

Answer posted 2 years ago

Question 25

Will this handle a 72000 litre pool in a northern rn climate View answer

Answer posted 2 years ago

Question 26

Can you have too big of a chlorinator? View answer

Answer posted 2 years ago

Question 27

I have a 15 x 32 18200 gallon pool. I have small children and occasionally have pool partya with 20+ people in the pool. I also live near trees that constantly release leaves on to the pool. Thousands in a day. Would this system be able to handle these conditions? View answer

Answer posted 2 years ago

Question 28

Bought until 5 months ago and not generating. Power doesn’t seem to be getting to cell but control box lights working and has power. Any ideas? View answer

Answer posted 2 years ago

Question 29

Will this work with a 25000 gallon above ground pool? View answer

Answer posted 2 years ago

Question 30

Where can I purchase the cell only for the 40 model ? View answer

Answer posted 2 years ago

Question 31

If you have the SJ20 and upgrade to the RJ30 plus, do all the replacement parts fit where the SJ20 parts were? For example the cell fittings? View answer

Answer posted 2 years ago

Question 32

I need the replacement electrodes for the sj40. Do you have an eta on the availability View answer

Answer posted 2 years ago

Question 33

I am looking for a unit to convert my pool to a saltwater pool. I noticed this system says that it is a "replacement" for current systems. What would I need to do to install this as a new system? View answer

Answer posted 2 years ago

Question 34

What are the dimensions of the RJ-45 cell and flow switch? I need to confirm if I have enough piping. Thank you View answer

Answer posted 2 years ago

Question 35

Hello, What is the minimum flow rate (GPM) for operation for the CircuPool Core series? I currently have a Jandy VSP pump that I run at 1200 rpms that generates 22 gpm. Would the Chlorinator work at this low flow rate? Thanks in advance for your assistance. Have a GREAT Day. Regards, Eric Brown View answer

Answer posted 2 years ago

Question 36

What setup would I need for a 7,000g saltwater pool. View answer

Answer posted 2 years ago | Sanitation > pH Control

Question 37

Is there a regular interval at which polarity is reversed? I run my pump 4 hours per day. When not running there will be no power to the control unit. I'm worried based on my past experience with Zodiac LM that with power being cut, the polarity will be reversed every 4 hours after power up which would be a problem (of course I can run it longer if needed). View answer

Answer posted 2 years ago

Question 38

How do I buy a replacement for the SJ 3500 Generator buy it's self?? View answer

Answer posted 2 years ago

Question 39

I currently have the UL40 system and was wondering if I can upgrade the cell to the UL55 without changing the control box? View answer

Answer posted 2 years ago

Question 40

What setting should i use for my SI plus chlorinator? it is currently on F 15 View answer

Answer posted 2 years ago

Question 41

What is the wording for the limited warranty * ? View answer

Answer posted 2 years ago

Question 42

Do you have a comparison chart for different models of salt chlorine generators? What is the difference between the RJ30 and Core35? View answer

Answer posted 2 years ago

Question 43

My old salt system lasted 19 years with the original cell, the system periodically reverse its polarity to self clean the cell. Does the CORE 35 do this? And if it doesn't why not? View answer

Answer posted 2 years ago

Question 44

What do I do when it says "salt cell low" View answer

Answer posted 2 years ago

Question 45

I have a 10,000 gallon pool and want to convert to salt. So many questions. It's been 3 years since I drained and replaced 1/2 the water in the pool due to a repair. Should I consider a water replacement prior to conversion ? Under what circumstances should I consider water replacement? Money not an option...which model should I buy? What size? When does increase size not benefit performance for salt conversion power, cell cleaning cycle time, and cell life? Installation should not be a consideration as all would fit my system. Thank you, Bill View answer

Answer posted 2 years ago

Question 46

Little add on to previous two questions that I submitted. Pool is located in south Florida (Port Charlotte, FL). Equipment is all outside. Lots of sun, rain and humidity. What would be best configuration for installing swg and O3 units together? Thanks again, Bill View answer

Answer posted 2 years ago | Sanitation > Ozone Generators

Question 47

Just submitted a question regarding swg and just ran across your Ozone units. Again, 10,000 gallon pool. Light use except for 2-3 weeks when grandkids visit. Which unit would you recommend? I have a Pentair VSP that I run 4-6 hours a day. How long/volume does the 03 unit require? View answer

Answer posted 2 years ago | Sanitation > Ozone Generators

Question 48

I have to remove my core 35. Can I install these with a piece of PVC pipe until the Core 35 is checked out? View answer

Answer posted 2 years ago

Question 49

what size pipe is used for the inlet and outlet and is it PVC? View answer

Answer posted 2 years ago

Question 50

Why does the boost light flash on my edge pool generator? View answer

Answer posted 2 years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools