Sanitation Q&A

Question 1

What is the power draw on the Edge system? View answer

Asked 2 ´years ago

Question 2

Can you mount this vertical? View answer

Asked 2 ´years ago

Question 3

Will the Sj-20 work with an above ground round 20’ x 48” Intex pool? If it does, do you have an adapter kit? The fittings are 1.5 in. View answer

Asked 2 ´years ago

Question 4

Other than warranty, what are the differences between the Universal Series and the RJ Series? View answer

Asked 2 ´years ago

Question 5

I have a Pentair ICHLOR 30 Salt Chlorine Generator that I want to replace. Will this unit work? My pool is about 13,000 gallons. View answer

Asked 2 ´years ago

Question 6

Can this be hard wired in place of my hayward salt generator with a 240v connection? View answer

Asked 2 ´years ago

Question 7

When will these be back in stock? View answer

Asked 2 ´years ago

Question 8

My cap is cracked at the area that appears to be "fused" together...I purchased my SJ-30 in May of 2019. How can I get this part? I have looked all over the internet. View answer

Asked 2 ´years ago

Question 9

Chlorine is not being generated. New cell with about 6 months service. Will a problem with the small board not indexing causing this problem? View answer

Asked 2 ´years ago

Question 10

My current Si controller will not index when the button is pushed. Will this fix the problem or do I need the other board? View answer

Asked 2 ´years ago

Question 11

What are the dimensions of the control box. I need to decide where I can mount the box. Thanks View answer

Asked 2 ´years ago

Question 12

I am going to be installing an 18,000 gallon above ground pool. Is the Circupool Universal40 the correct size for me and will it come with everything I need for a new install? View answer

Asked 2 ´years ago

Question 13

Does it matter if I hook up to 110 volts instead of 220? View answer

Asked 2 ´years ago

Question 14

I have a 25000 gal. Gunite pool and live in Maryland. Would you recommend the 40 or 65 model for maximum efficiency. Also can the control panel be mounted outside and is it waterproof View answer

Asked 2 ´years ago

Question 15

Can i use rj-45 for a 10000 gallon pool. My neighbor sold his house before he got to instill it on his pool. View answer

Asked 2 ´years ago

Question 16

I have a 21600 gallons inground pool , What would be the best suitable model salt chlorine generator? View answer

Asked 2 ´years ago

Question 17

Does the unit stop making chlorine when the water temperature drops? My cold water light is on and it doesn't seem to be making any chlorine. If it stop, what is the temperature range for it to work? View answer

Asked 2 ´years ago

Question 18

What is the expected lifespan of the CORE55 Replacement Cell. How does the eight year warranty impact the cost of replacing the cell if it applies at all? View answer

Asked 2 ´years ago

Question 19

What is the length of the RJ-30 cell? Trying to figure out if it will fit or if I need the vertical install kit. THanks. View answer

Asked 2 ´years ago

Question 20

We have a RJ 45 and a pool with just under 14,000 gal. Once Chem levels are achieved how much salt should need to be added to maintain them. It is an indoor pool. View answer

Asked 2 ´years ago

Question 21

I'm interested in the pH control system. Your website states that a discount may be available to me since I just installed a Core35 salt system. Please let me know what my price would be for the pH control. Thanks, Manny Roman View answer

Asked 2 ´years ago | Sanitation > pH Control

Question 22

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 2 ´years ago

Question 23

1)Hi, are your generators universal voltage? Are there for 220 Volts? 2) How many years can work for a pool of 80,000 liters(21,000 gallons), Thanks View answer

Asked 2 ´years ago

Question 24

I have 1 -1/2" pipe 44gpm Hayward filter and Hayward pool heater. Will this work easily with these things?? View answer

Asked 2 ´years ago

Question 25

Is the SJ20 110 or 240 volt? View answer

Asked 2 ´years ago

Question 26

How do you winterize the unit? View answer

Asked 3 ´years ago

Question 27

The only power source available is 240 volt. Can the core 35 be rewired for a 240 volt connection? View answer

Asked 3 ´years ago

Question 28

Will this control panel work with a Hayward Salt Cell? View answer

Asked 3 ´years ago

Question 29

Is this compatible with iAquaLink 3.0 so I can view my readings remotely? View answer

Asked 3 ´years ago

Question 30

Can I use this unit with a variable speed (vs) pump? If so what rpm and duration settings should I use? View answers

Asked 3 ´years ago

Question 31

What are the dimensions of the UL 40 and it's flow control unit. (LxW). I'm investigating an acceptable place to install in my existing cholorine system piping. I cannot find this info anywhere on your site. View answer

Asked 3 ´years ago

Question 32

I have an RJ-30 Plus system. What is the effect of Cell Version setting on the Menu? Each numerical value also has a '+' and '-'. What does this do to the operation of the system? This is not mentioned anywhere in the manual. View answer

Asked 3 ´years ago

Question 33

Does the Universal55 have the same threads as Hayward Goldline Aqua Rite? I.e., can I unscrew the Hayward and xxxx in the Universal? Or is it the length that is what makes them 'compatible' per the webpage description? Thanks much. View answer

Asked 3 ´years ago

Question 34

what is the difference compared to the old RJ30 View answer

Asked 3 ´years ago

Question 35

Concerning your RJ-20 System, I am close to the beach and a very corrosive environment, what is the rating on your control box and how does it stand up in salty conditions? View answer

Asked 3 ´years ago

Question 36

Hello. I have an RJ-60+ which is rated at 300W, so presumably it only draws 1.36A at 220V. However, the manual also mentions the cell current ranging between 2.5 and 7.8 amps. I can also see the cell current displayed when I cycle through the menu options. For example, at 50%, it shows 5.7 amps. I'm assuming this cell current is different from the load on the circuit breaker. Can you confirm please? View answer

Asked 3 ´years ago

Question 37

On the edge40 for do it yourselfer does this just plug into a gfci outlet. I cant find the installation instructions. I have a small pool maybe 10000-12000 gal. View answer

Asked 3 ´years ago

Question 38

Core35 warranty 8 year limited. What is covered? View answer

Asked 3 ´years ago

Question 39

Is it product partial to leave the unit powered 24-7 ? I recently purchased a variable speed pump which leaves the unit on displaying various lights…I realize the flow switch controls the Cell but I dont want to unnecessarily damage the unit by leaving it powered 24-7 View answer

Asked 3 ´years ago

Question 40

What size PVC pipe does this fit? My plumbing is 1.5" View answer

Asked 3 ´years ago

Question 41

I have a core35. Is it necessary to remove the head for winter? Will this cap fit? View answer

Asked 3 ´years ago

Question 42

I just bought one of these to replace my origional SJ-55 Housing that does not have the xxxx on adapters to connect to the return line. Is there an O-Ring that goes between the adapter and the Clear Housing to insure a complete seal? View answer

Asked 3 ´years ago

Question 43

How long is the cord that connects the cell housing to the control module? View answer

Asked 3 ´years ago

Question 44

I have an Si-45 unit. The cell needs replacing but I have reduced the size of the pool from 35,000 gals to 22,000 gals. Is it possible to replace the original cell with an Si-30 replacement ? View answer

Asked 3 ´years ago

Question 45

What is the warranty, parts availability?Do you have a tech sheet or sales brochure you could email or mail to me? View answer

Asked 3 ´years ago

Question 46

What is the length of the EDG40 chlorine generator cell, please? Just end-of-threads-to-end-of-threads... View answer

Asked 3 ´years ago

Question 47

I have the Edge40. After a big rainstorm, the system told me that salt level was low. I added a few bags, and got it tested. Showings 4500 level. I had it running on high and boost for about 6 hours, yet my chlorine levels were still extremely low. I then cleaned the cell by the book and ran it again for a few hours with no change to chlorine levels. Still shows no chlorine when tested. I looked at the cell with a flashlight while it was running. I did see the electrolysis bubbles being formed. Yet after a few hours the chlorine levels did not rise. Please advise. View answer

Asked 3 ´years ago

Question 48

I have an older RJ 45 model, S/N 30477. Will the SJ 45 fit on my existing plumbing? IE, are the inlet and outlet openings the same distance apart as the RJ? Can you send dimensional specs to me? View answer

Asked 3 ´years ago

Question 49

which system should I use for a 24,000 gal pool? View answer

Asked 3 ´years ago

Question 50

if cell maint. light flashes like a strobe light instead of a solid light what does that mean? i have a circupool universal 25 View answer

Asked 3 ´years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools