Question 1

How do I shock my salt water pool that has a RJ60+ system. View answer

Asked 2 ´years ago

Question 2

I bought this to replace an existing RJ-30 classic. Will this work with my existing system? View answer

Asked 2 ´years ago | Replacement Parts > Replacement Cells > RJ PLUS-Series Replacement Cells

Question 3

i NEED TUE CELL RI need to replace the cell of an RJ cloner, series 030284. I don't have the model. With the cerie number, can you tell me which would be the one. Thank you, EMPLAICMENT View answer

Asked 2 ´years ago | Replacement Parts > Replacement Cells > RJ-Classic Replacement Cells

Question 4

why does the housing leak? I replaced gasket and it leaks around the threads View answer

Asked 2 ´years ago

Question 5

What are the dimensions for this cap? 3” diameter? And what measurements on the threading? There is nothing about it listed in the description. Are the EDGE series units only compatible with this cap, or is there a stand version/option as well? View answer

Asked 2 ´years ago

Question 6

Is this compatible with Hayward aql-ps-4 and similar controllers? or just Aquarite? View answer

Asked 2 ´years ago

Question 7

I need new part # core-clhs,, does it come with new o ring for the top side,or is it separate,if so what part number View answer

Asked 2 ´years ago

Question 8

Please can you provide a technical drawing for this. Looking to replace a Surechlor 3000 SC210 and need to compare sizes/threads/fittings etc. thanks in advance, Gary View answer

Asked 2 ´years ago

Question 9

is there a way to calibrate the cell? salt level in the pool shows to be around 3900 and the display shows salt too low...any help greatly appreciated..thank you... it is a si30 system with a 15000 gallon pool View answer

Asked 2 ´years ago

Question 10

Overall length of salt cell. Also, is it 2 inch tuping in and out, or does it have recucing bushings to change larger size to 2 inch? What's the approximate weight of the salt cell? View answer

Asked 2 ´years ago

Question 11

What is warranty on CIR-GEN15-RC salt cell? Please be specific. View answer

Asked 2 ´years ago

Question 12

Is the 3 year warranty for full replacement (no pro-rating) for the full 3 years? I assume that it is compatible with a Hayward Swimpure Extreme system and T-9 cell? View answer

Asked 2 ´years ago | Replacement Parts > Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 13

When do you think this product will be available again? I am converting a 9 person hot tub to saltwater. Would the edge25 be too large for hot tub? View answer

Asked 2 ´years ago

Question 14

What is the delivery time for a CircuPool® Si-45 View answer

Asked 2 ´years ago

Question 15

How does the RJ-60 open up to replace the cell fins? View answer

Asked 2 ´years ago

Question 16

Can this chlorinator be added before the filter after the pump ?The existing pool system is very constrained where the water returns to the pool after the filter View answer

Asked 2 ´years ago

Question 17

Is there a replacement for the cell when it finally dies, or do you have to buy the entire system? I am not seeing one on the site. View answer

Asked 2 ´years ago

Question 18

Would this work for a 1.5 HP pump? I've blown 2 timers in two years because they couldn't handle the load of the pump and salt system. View answer

Asked 2 ´years ago | Replacement Parts > Parts & Accessories > Heavy Duty Outdoor Programmable Timer (110V)

Question 19

Can I easily replace my jandy 1400 aquapure system with this circupool 40k unit? View answer

Asked 2 ´years ago

Question 20

when there is no electricity, will the device return to work after the power is restored? View answer

Asked 2 ´years ago

Question 21

Are replacement cells readiiy available and how much $ If the flow valve breaks, can it be replaced or is a new cell required. View answer

Asked 2 ´years ago

Question 22

Do you offer a military discount? View answer

Asked 2 ´years ago

Question 23

I just ordered an RJ-45+. Should I install a check valve after the heater? View answer

Asked 2 ´years ago

Question 24

We're thinking of replacing out Hayward with this system. Can we reply on the flow switch to turn the chlorinator on and off? The pump is always powered, but has an internal controller as well as variable speed. We can have reduced flow as well as no flow during parts of the day. Will this hurt your system? Thank you in advance. View answer

Asked 2 ´years ago

Question 25

Can I use this system to lower my PH to 6.9 - 7.0? I have a staining problem and it is advised to lower the Ph to break uip the calcium covering the dirt so it can be vacuumed up View answer

Asked 2 ´years ago | Sanitation > pH Control

Question 26

What is the max amp draw of this unit? I am trying to decide if I should add it to my pump circuit or add a new circuit and if the latter than size the circuit. View answer

Asked 2 ´years ago

Question 27

Will this cap fit r j 45 View answer

Asked 2 ´years ago

Question 28

Will this replace the rj45 View answer

Asked 2 ´years ago

Question 29

Can this replace a T17 cell View answer

Asked 2 ´years ago

Question 30

The Flow LED on the panel will turn green for aprox. 10 seconds and then go red for aprox. 2 min. When it will go green again for 10 seconds repeating. Could this be a faulty flow switch or something else? View answer

Asked 2 ´years ago

Question 31

Does the CircuPool Core 35 come with a sacrificial anode? View answer

Asked 2 ´years ago

Question 32

I have a timer on my pump. Does the generator need to be on a timer also or is it ok to just let the flow switch shut down the unit when the pump is off? View answer

Asked 2 ´years ago

Question 33

Will the universal 40 cell fit the t-15 directly. View answer

Asked 2 ´years ago

Question 34

How long do these RJ 30 cells last? View answer

Asked 2 ´years ago

Question 35

i HAVE A 25,000 GAL POOL WILL THE CORE35 BE SUFFICIENT? View answer

Asked 2 ´years ago

Question 36

Can we get an adapter kit for a pentair ic 40 View answer

Asked 2 ´years ago

Question 37

Will this handle a 72000 litre pool in a northern rn climate View answer

Asked 2 ´years ago

Question 38

Bought until 5 months ago and not generating. Power doesn’t seem to be getting to cell but control box lights working and has power. Any ideas? View answer

Asked 2 ´years ago

Question 39

I have a 15 x 32 18200 gallon pool. I have small children and occasionally have pool partya with 20+ people in the pool. I also live near trees that constantly release leaves on to the pool. Thousands in a day. Would this system be able to handle these conditions? View answer

Asked 2 ´years ago

Question 40

I am re-plumbing My RJ60+ because of leaks. I purchased the Vertical installation kit but it does not include a flow switch housing. Is this the one I need? View answer

Asked 1 ´year ago

Question 41

I have an SI-40 will the SI-45 replacement cell work with it. View answer

Asked 2 ´years ago

Question 42

I am reinstalling my RJ60+ because of leaks. Is this union the same as the one that came with my RJ60+. Does it a a groove cut in it for the o-ring? View answer

Asked 2 ´years ago

Question 43

Can you have too big of a chlorinator? View answer

Asked 2 ´years ago

Question 44

Does the flow switch install into the existing PVC tee fitting? View answer

Asked 2 ´years ago | CircuPool® Flow Switch / Temperature Sensor (No PVC Tee Fitting)

Question 45

Just received my order from you and it was a housing O-ring, Mechanical Seal, and impeller, not quite sure of the sequence and I want to be sure I put everything back the way it suppose to be. Would you have a better picture you could e-mail me that is a little better than the manual shows. When I unscrewed the impeller some of the parts on mechanical seal came apart and I would like to make sure I do this right. Thanks for any help you could give me. View answer

Asked 2 ´years ago

Question 46

Where can I purchase the cell only for the 40 model ? View answer

Asked 2 ´years ago

Question 47

Will this work with a 25000 gallon above ground pool? View answer

Asked 2 ´years ago

Question 48

I have a Circupool Core. Needs an element. How to tell which one? thank you View answer

Asked 2 ´years ago | Replacement Parts > Replacement Cells > CORE-Series Replacement Cells

Question 49

can i replace a rj45 with a rj60 View answer

Asked 2 ´years ago | Replacement Parts > Replacement Cells > RJ PLUS-Series Replacement Cells

Question 50

Do you know when this product is expected to be back in stock (CircuPool CIR-GEN15 salt cell)? View answer

Asked 2 ´years ago

Browse by Topic

Tools