Sanitation Q&A

Question 1

I currently have a Jandy AquaPure PLC1400 that went bad. Can this replace that without professional? Thanks much. Duane View answer

Asked 4 ´years ago

Question 2

The unit is blowing the 15 amp fuse what could cause it? View answer

Asked 4 ´years ago

Question 3

Hello, I have just purchased the RJ-30 Plus Salt system, and wanted to know it's power usage in Watts and Amps. Also, is it more efficient to connect it to 220v vs. 120v, and if so, how much more efficient? Whats the amperage & wattage for 220v vs. 120v connections? Thank you! View answer

Asked 4 ´years ago

Question 4

Is the cell a direct replacement for the Pentair IC20? And, is the flowmeter integral it the cell? View answer

Asked 4 ´years ago

Question 5

Does this product eliminate the need for chlorine By generating it’s own salt ? View answer

Asked 4 ´years ago

Question 6

I just got the Core35 model. Can you leave the unit on even if the pool pump is not running since I don't have a timer? View answer

Asked 4 ´years ago

Question 7

I have an auto clear system will this this work to replace that system. Thanks Scott View answer

Asked 4 ´years ago

Question 8

Will this unit work for my 2200 gal pebble tec spa? Any special setting requirements since my spa much less than 15000 gal capacity of the CORE15? View answer

Asked 4 ´years ago

Question 9

What are the dimensions of the Core55 unit? I need to make sure I have enough room to install with existing setup. View answer

Asked 4 ´years ago

Question 10

Hi I have a 20,000 gallon pool pentair IC40 Salt Chlorinator right now and want to replace with the RJ30. I wanted to know if the RJ30 would fit the current plumbing exactly or would I have to do some repiping? View answer

Asked 4 ´years ago

Question 11

Does this generator cell plug up with calcite quicker/more readily than the CORE? We have very hard water and very high temperatures, View answer

Asked 4 ´years ago

Question 12

I have 8,000 gal. Do they make a smaller unit? Thank you View answer

Asked 4 ´years ago

Question 13

I have approx 20,000 gallon pool running with with your salt system. You mentioned on a previous answer that I will still need to check for all chemicals on the pool. Do I still need to add salt and stabilizer with same frequency as before installing the CO2 system? View answer

Asked 4 ´years ago | Sanitation > pH Control

Question 14

Is the 10,000 hour life just for the cell? Is that the recommended replacement? View answer

Asked 4 ´years ago

Question 15

Will this be a direct replacement for the Si45? View answer

Asked 4 ´years ago

Question 16

can this unit be powered up 24/7, or does it need a timer/clock? View answer

Asked 4 ´years ago

Question 17

Is the flow through the cell directional? Does it matter which way I install it? View answer

Asked 4 ´years ago

Question 18

Hi there, I got some questions. does this unit shows a water temp? also will this unit turn off when the pump goes off without being connected to the pump timer? in other words will it sense the water flow when the pump starts and come on? Thankyou for your help. View answer

Asked 4 ´years ago

Question 19

when cell is needing replace do you replace the entire unit View answer

Asked 4 ´years ago

Question 20

My pool Is 27,000 gals ... is it best to purchase core 55 salt chlorinator or would that be to big ..also will the metal components on the pool equipment suffer from the salt View answer

Asked 4 ´years ago

Question 21

What is the current draw of the entire system if running on 110VAC? View answer

Asked 4 ´years ago

Question 22

What are my issues using a reducer for 1 1/2 to 2 in . Suggestions View answer

Asked 4 ´years ago

Question 23

I have a salt system and I run the pump year round but cover it in the winter months. Will this eliminate all the chemicals I have to add when I open the pool in the spring? With the exception of adding the salt of course. ai have a 20 X 30 pool so how many tanks would I need? View answer

Asked 4 ´years ago | Sanitation > pH Control

Question 24

Just received it, and so psyched to replace my 18 year old Aquarite, it looks great. Can I keep the old flow switch from that system that still works fine, or do I need to swap in the new one. Just looking for simplicity in the install. Thanks, View answer

Asked 4 ´years ago

Question 25

I see the electronics are different, but is the cell physically the same length at the Hayward, making the plumbing upgrade a piece of cake? View answer

Asked 4 ´years ago

Question 26

1. On my screen it says power 50% it will not go higher. Is this because the water temp is less than 60 degrees. 2. Will it go higher when the water temp goes up View answer

Asked 4 ´years ago

Question 27

max amperage draw at 220v View answer

Asked 4 ´years ago

Question 28

How much space is required below 2" pipe to fit cell body. Can't find drawing with distances. View answer

Asked 4 ´years ago

Question 29

I have an inground pool 13,500 gallon in southwest Florida what size SJ unit will i need ? View answer

Asked 4 ´years ago

Question 30

I have a RJ-45 Plus Salt Generator. I don't know what the winter mode button actually does and what it's usefulness is. The owners manual really doesn't describe it's function or why it should or should not be used. View answer

Asked 4 ´years ago

Question 31

What version should be on the Circupool Module for the SI 30. I believe mine is set on 9. View answer

Asked 4 ´years ago

Question 32

do you need to shock treat a pool with this Unit? Should non-chlorine shock be used? How often? View answer

Asked 4 ´years ago

Question 33

Cutting the cord is okay when replacing the collar cap. Or is there a way to disassemble the plug? View answer

Asked 4 ´years ago

Question 34

Can the CO2 injector be placed anywhere on the pressure side of the system after the pump? What about the pressure sensor? Note: I would only have one port available on the pump for use with this system. View answer

Asked 5 ´years ago | Sanitation > pH Control

Question 35

Need to get a manual. I own this device already View answer

Asked 5 ´years ago

Question 36

What's the minimum pressure required for the system to operate? What typical minimum RPM is needed with variable speed pumps? View answer

Asked 5 ´years ago | Sanitation > pH Control

Question 37

Is there a place where i can get actual dimensions? Like a shop drawing. Ive already managed to rule out the CORE55 from rough dimensions given to another. I suspect this model will be a much more close call on fitting. View answer

Asked 5 ´years ago

Question 38

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 5 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 39

1. Is the Core55 UL listed? 2. Does the unit have a flow direction as the console might be facing my filter? 3. At full Chlorine output what is the 120/240 vac amperage (current draw)?? 4. Does the unit have a bonding lug for connection to the pool system grounded conductor? View answer

Asked 5 ´years ago

Question 40

What is the recommended GPM flow for the RJ45 system, Core35, and Core55 systems? View answer

Asked 5 ´years ago

Question 41

HI..MY SALT LEVEL PPM IS 5000. WILL YUR SYTEM STILL GENERATE CLHORILE AT THIS LEVEL? View answer

Asked 5 ´years ago

Question 42

Recommended set up on rj45 plus on 22000 gallon pool. Variable speed pump. Pump run time and percentage setting. Thanks View answer

Asked 5 ´years ago

Question 43

DOES THE NO FLOW LIGHT STAY ON WHEN THE PUMP IS OFF? IF SO, HOW LONG? WILL I HAVE TO MANUALLY TURN IT OFF EVERY DAY? View answer

Asked 5 ´years ago

Question 44

I currenty have a aquapure 1400 that I am really dissatisfied with. I just changed the cell and it is still sporadic with error messages. I can’t believe I just bought a cell for $700.00 and nothing! Is this system a direct bolt on? I don’t want to continue throwing money at this problem. The pool size is 18,000 gallons and I live in Miami, Fl. Which is hot! View answer

Asked 5 ´years ago

Question 45

Only number two polarity comes on View answer

Asked 5 ´years ago

Question 46

Did this take the place of the SGS salt system? View answer

Asked 5 ´years ago

Question 47

I just installed an RJ60+ in place of my Aquapure 1400. I was just wondering- on the unit, there is a “remote” indicator. What is this for? Are there ways to adjust the unit remotely, perhaps interfacing it with the Jandy system? Thanks. View answer

Asked 5 ´years ago

Question 48

What is the grams per hour output of the RJ45? View answer

Asked 5 ´years ago

Question 49

Does the RJ45 refer to pool size (45,000 Ga's) or does the 45 represent the element output in grams per hour? View answer

Asked 5 ´years ago

Question 50

I currently have a zodiac lm2-24 salt chlorinator. Does the Circupool sj-40 mount on the same plumbing? (i.e., have the same dimensions for its fittings? )or will I have to re-engineer the existing pvc? View answer

Asked 5 ´years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools