Sanitation Q&A

Question 1

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 2

Why is my salt level reading 0000 and no warning lights on? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 3

What does SLO mean? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 4

Do I need to register my new system and if so, where do I register it at? View answer

Asked 11 ´months ago

Question 5

What is the minimum required flow (in GPM) for the RJ60+ Flow Switch to close and enable the Salt Cell to generate Chlorine? View answer

Asked 2 ´years ago

Question 6

Will the system say when it’s time to change the cell? View answer

Asked 4 ´years ago

Question 7

Is there a place where i can get actual dimensions? Like a shop drawing. Ive already managed to rule out the CORE55 from rough dimensions given to another. I suspect this model will be a much more close call on fitting. View answer

Asked 4 ´years ago

Question 8

how to register my product View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 9

Hello, I have just purchased the RJ-30 Plus Salt system, and wanted to know it's power usage in Watts and Amps. Also, is it more efficient to connect it to 220v vs. 120v, and if so, how much more efficient? Whats the amperage & wattage for 220v vs. 120v connections? Thank you! View answer

Asked 3 ´years ago

Question 10

What is the RJ+ cell unit's maximum pressure (PSI) rating? View answer

Asked 2 ´years ago

Question 11

I have the system with 3 CO2 cylinders. Can I open all 3 cylinders at the same time or I have to open one by one? View answer

Asked 8 ´months ago | Sanitation > pH Control > CircuPool TOTALBalance pH Control System with Patented CO2 Infusion

Question 12

How do I shock my salt water pool that has a RJ60+ system. View answer

Asked 2 ´years ago

Question 13

What is the current draw of the entire system if running on 110VAC? View answer

Asked 3 ´years ago

Question 14

Does this system have a remote start View answer

Asked 3 ´years ago

Question 15

The description says this can be installed horizontally or vertically but then the website shows a ventricle installation kit. Does this mean the unit as purchased cannot be installed vertically out of the box? View answer

Asked 3 ´years ago

Question 16

Does it hurt the salt generator to be running when the pump is off and no water going through? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 17

Can you use the flow switch from my Hayward system or do I have to change it? Also what would be the shipping time after I order? Universal 40 View answer

Asked 3 ´years ago

Question 18

Hi, I have a pool of 22.000 gallons with a pump pentair of 2 HP SF-N1-2A (85 GPM Aprox). If I Installed a Universal 40 how many hours a day I must turn on the system ?. I live in Colombia and the temperature of the water is about 84 F. When you talk about 2.0 lb, how many working hours it means ? Regards, Diego. View answer

Asked 3 ´years ago

Question 19

I have a high water temp message on the display. What needs done to fix this? View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 20

Can you replace a ul-25 cell with a ul-40cell? View answer

Asked 9 ´months ago

Question 21

Is there a way to set run time limit? View answer

Asked 9 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 22

How to calibrate salinity reading View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 23

Screen shows cell connection View answer

Asked 6 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 24

How to install sj45a to variable speed pump View answer

Asked 6 ´months ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 25

i HAVE A 25,000 GAL POOL WILL THE CORE35 BE SUFFICIENT? View answer

Asked 2 ´years ago

Question 26

I have a sj-40 salt cell can a sj-55 work with the same control panel? Is there a bigger sj-45 or a sj-50 that work View answer

Asked 6 ´months ago

Question 27

Industry standard is 1.5x to 2x the actual pool size. My pool is only 5k gal. Can I use any model for my pool? View answer

Asked 6 ´months ago | Sanitation > Salt Chlorinators

Question 28

what size pipe is used for the inlet and outlet and is it PVC? View answer

Asked 2 ´years ago

Question 29

Is the warranty for 8 years even if I install it the owner and it’s large enough for 80 thousand litres pooland brand new unit and will I receive it and is in Canadian money this numbe thanks View answer

Asked 2 ´years ago

Question 30

can the Core 55 system be installed vertically View answer

Asked 2 ´years ago

Question 31

Stops generating after a few hours of running. Turn it off and on and back to normal. View answer

Asked 6 ´months ago

Question 32

The only power source available is 240 volt. Can the core 35 be rewired for a 240 volt connection? View answer

Asked 3 ´years ago

Question 33

Flow switch View answer

Asked 6 ´months ago

Question 34

Can the flow switch be installed vertically while the CORE will be horizontal? View answer

Asked 6 ´months ago | Support

Question 35

Does the warranty cover the salt cell? View answer

Asked 5 ´months ago

Question 36

Is the flow through the cell directional? Does it matter which way I install it? View answer

Asked 3 ´years ago

Question 37

Do I use the setting +30 or -30 for the RJ plus 30? View answer

Asked 5 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 38

I have a 13,000 gallon fiberglass pool. I was looking at your Core35, is this overkill? I would rather have it and not need it, than need it and not have it. View answer

Asked 3 ´years ago

Question 39

How do you winterize the unit? View answer

Asked 3 ´years ago

Question 40

can this unit be powered up 24/7, or does it need a timer/clock? View answer

Asked 3 ´years ago

Question 41

I have the Edge40. After a big rainstorm, the system told me that salt level was low. I added a few bags, and got it tested. Showings 4500 level. I had it running on high and boost for about 6 hours, yet my chlorine levels were still extremely low. I then cleaned the cell by the book and ran it again for a few hours with no change to chlorine levels. Still shows no chlorine when tested. I looked at the cell with a flashlight while it was running. I did see the electrolysis bubbles being formed. Yet after a few hours the chlorine levels did not rise. Please advise. View answer

Asked 3 ´years ago

Question 42

Is the circupool core 35 compatable with Pentair pool systems? We have the intelleflo pump and easy touch pool spa control system View answer

Asked 5 ´years ago

Question 43

The Flow LED on the panel will turn green for aprox. 10 seconds and then go red for aprox. 2 min. When it will go green again for 10 seconds repeating. Could this be a faulty flow switch or something else? View answer

Asked 2 ´years ago

Question 44

Can I use this unit with a variable speed (vs) pump? If so what rpm and duration settings should I use? View answers

Asked 3 ´years ago

Question 45

The RJ45+ touch pad stopped working properly View answer

Asked 5 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 46

Hi, I'm a return customer. Well, I think it's time to replace the old system with a new one. My question is... I see a round "white" fitting with wires attached in your photos. What is that? I don't have anything like that on my current system (RJ20 serial # 030282). Also, will the chlorinator fit the same fittings as my old system? Thank You! View answer

Asked 2 ´years ago

Question 47

which system should I use for a 24,000 gal pool? View answer

Asked 3 ´years ago

Question 48

Are these units using corona discharge? View answer

Asked 6 ´months ago | Sanitation > Ozone Generators

Question 49

How do you claim a warranty on my CircuPool equipment? View answer

Asked 2 ´years ago

Question 50

Will any sand filter work with this system or do i need a newer sand filter? Mine is almost 25 years old. View answer

Asked 4 ´years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools