Question 1

How can I tell what generation and size my cell is? View answer

Asked 1 ´year ago

Question 2

What is the length of the RJ-30 cell? Trying to figure out if it will fit or if I need the vertical install kit. THanks. View answer

Asked 4 ´years ago

Question 3

Why does my rj30+ read "Temp peNo" and the green power light flashes? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 4

1. On my screen it says power 50% it will not go higher. Is this because the water temp is less than 60 degrees. 2. Will it go higher when the water temp goes up View answer

Asked 5 ´years ago

Question 5

What is the warranty, parts availability?Do you have a tech sheet or sales brochure you could email or mail to me? View answer

Asked 4 ´years ago

Question 6

Our GRC/J1400-3 chlorine generator has failed. Looking for a direct replacement so the pipes don't need to be changed. Is this model applicable? Thanks View answer

Asked 6 ´years ago

Question 7

I want to purchase the CircuPool salt system. Is my existing Hayward flow switch compatible with the new CircuPool? View answer

Asked 1 ´year ago

Question 8

Getting ready to purchase your package TJ-16 AND THE CJ-2750. I have a 22000 gal pool with 1-1/2' plumbing. Does the CJ-2750 come with reducers and if not is this over kill for my uncovered pool. View answer

Asked 4 ´years ago

Question 9

how long is it typically before you have to change the filter. I have a DE filter and usually backwash every 2-3 months. View answer

Asked 5 ´years ago

Question 10

I bought a house with a 26qft pool. I'm trying to learn to control the salt chlorinator (SJ series) for my pool. The water is murky now, with algae. All parameters are ok (I check regularly), except chlorine and free chlorine levels, which are at 0. How do I know that the cell actually works? Is there a documentation regarding the controller? the left bottom green light has been blinking. Also, how is this controller related to the pump? I have Hayward controller for the pump, and I'm clueless here too. Please help. View answer

Asked 4 ´years ago

Question 11

On our second SJ40 and have never used Super CL Mode and would like to know should the light be red.?? We just had the pool redone and need to get the chlorine and salinity back up to where they need to be.......... View answer

Asked 6 ´years ago

Question 12

What is the length of the EDG40 chlorine generator cell, please? Just end-of-threads-to-end-of-threads... View answer

Asked 4 ´years ago

Question 13

I have a limited length of 2" pipe to install the generator. What is the length of pipe needed to be cut out for install? Does the unit come with a cut template? View answer

Asked 5 ´years ago

Question 14

we just recently bought this product and have questions. Is there a customer service department we can speak to? View answer

Asked 6 ´years ago

Question 15

New system installed how long should low salt light and cell maintenance stay on View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 16

can the Core 55 system be installed vertically View answer

Asked 4 ´years ago

Question 17

no flow light View answer

Asked 2 ´years ago

Question 18

My pool is about 27,000 gallons which falls in between the recommended sizing for the CORE35 and CORE55 but closer to CORE35. Which do you recommend in this case? View answer

Asked 5 ´years ago

Question 19

My pool Is 27,000 gals ... is it best to purchase core 55 salt chlorinator or would that be to big ..also will the metal components on the pool equipment suffer from the salt View answer

Asked 5 ´years ago

Question 20

1. Is the Core55 UL listed? 2. Does the unit have a flow direction as the console might be facing my filter? 3. At full Chlorine output what is the 120/240 vac amperage (current draw)?? 4. Does the unit have a bonding lug for connection to the pool system grounded conductor? View answer

Asked 5 ´years ago

Question 21

On the Edge 40 how long is the cable from controller to cell View answer

Asked 2 ´years ago

Question 22

when there is no electricity, will the device return to work after the power is restored? View answer

Asked 4 ´years ago

Question 23

We're thinking of replacing out Hayward with this system. Can we reply on the flow switch to turn the chlorinator on and off? The pump is always powered, but has an internal controller as well as variable speed. We can have reduced flow as well as no flow during parts of the day. Will this hurt your system? Thank you in advance. View answer

Asked 4 ´years ago

Question 24

Does the CircuPool Core 35 come with a sacrificial anode? View answer

Asked 4 ´years ago

Question 25

What is the wording for the limited warranty * ? View answer

Asked 4 ´years ago

Question 26

Do you have a comparison chart for different models of salt chlorine generators? What is the difference between the RJ30 and Core35? View answer

Asked 4 ´years ago

Question 27

How is this hardwired? Does it come with a separate cable for hard wiring? Can I cut the plug? More details needed View answer

Asked 2 ´years ago | Sanitation > Salt Chlorinators > CORE Series

Question 28

I have a variable speed pump. The question is, when I am at the low speed I suspect the flow will not be enough for the flow switch to read so it will not produce salt. Is this correct? Will this harm the system?If I purchase this my plan is to set the pump speeds to get the chlorine level I need. Pool is 15000 gallons View answer

Asked 4 ´years ago

Question 29

"Roughly" how long is the power wire? If it's short, is it easy to wire in a new one? "Roughly" how many amps would one think the 35k unit draws? I'm deciding on hardwiring it to my pump timer or a separate GFI outlet that runs off the timer. View answer

Asked 4 ´years ago

Question 30

How much space is required below 2" pipe to fit cell body. Can't find drawing with distances. View answer

Asked 5 ´years ago

Question 31

Is the circupool core 35 compatable with Pentair pool systems? We have the intelleflo pump and easy touch pool spa control system View answer

Asked 7 ´years ago

Question 32

Flow sensor warranty? View answer

Asked 1 ´year ago

Question 33

How do you convert a CircuPool RJ PLUS from 220 to 110? View answer

Asked 1 ´year ago

Question 34

does the cell come with the cable attached ? View answer

Asked 4 ´years ago | Replacement Cells > Universal-Series Replacement Cells

Question 35

Leaking salt cell View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 36

Since the SJ 30 is out of stock can I use this one instead? View answer

Asked 4 ´years ago

Question 37

is there a way to calibrate the cell? salt level in the pool shows to be around 3900 and the display shows salt too low...any help greatly appreciated..thank you... it is a si30 system with a 15000 gallon pool View answer

Asked 3 ´years ago

Question 38

What does a water temperature of 159 mean? View answer

Asked 1 ´year ago

Question 39

Will this replace a Hayward TCELL925SWP? View answer

Asked 1 ´year ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 40

"Cell Connection" locks up display and controls. My understanding there is a module addition to fix this issue ? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 41

I have a Hayward turbo cell tcell925. Extended life. (I'm reading right off of the Tcell). Is this the correct replacement for mine? View answer

Asked 5 ´years ago

Question 42

Can I return the item and is there a fee for returning the item? View answer

Asked 5 ´years ago

Question 43

I installed an RJ 45 this spring. Should I cover the control module this winter? View answer

Asked 1 ´year ago | Support

Question 44

Does this work with the hayward omnilogic controller? View answer

Asked 4 ´years ago

Question 45

Cell connection View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 46

What else can I use to clean the salt cell? View answer

Asked 1 ´year ago

Question 47

High TDS from a Storm Surge View answer

Asked 1 ´year ago

Question 48

Just wanted to confirm that this would easily replace the T-Cell Aqua-rite with no additional calibration or other. Also, If I order today when should I expect it to be delivered to MN? View answer

Asked 6 ´years ago | Replacement Cells > Aftermarket Replacement Cells <span>fitting Hayward® / Goldline®</span>

Question 49

I have a Goldline controller that was installed in 2002. It works fine with the original T-Cell-15. Do you know if this replacement cell will work with a controller from this date? View answer

Asked 6 ´years ago

Question 50

My RJ30+ has a Cell Maint. and Lo Salt. Cell is clean and salinity is good; what do I do? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Browse by Topic

Tools