Sanitation Q&A

Question 1

CORE55 has 55000 hour lifespan and the RJ-60 is only 15000 are they rated the same? Will CORE55 last 3 times more? View answer

Asked 1 ´year ago

Question 2

Would the CircuPool® Universal 55 be ok for a 25, 000 gallon pool? Would this larger unit be beneficial or too large for the pool?

Asked 10 ´months ago

Question 3

All the LEDs went out on my edge25. Do I need a new unit? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > EDGE Series > CircuPool EDGE Series Salt Chlorine Generators - Owner Resources

Question 4

Can I change the plug to a standard grounded outlet plug? All my equipment items are plug-in. View answer

Asked 8 ´months ago

Question 5

Can I install this in a new pool that never had a salt system? View answer

Asked 8 ´months ago

Question 6

My pool is 70,000 gallons View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators

Question 7

RJ-60 Plus does the direction of flow through the cell matter? View answer

Asked 1 ´year ago | Support

Question 8

What is the "Remote" LED for? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 9

Should the power cord from control box to timer be routed in conduit? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 10

why do I have letters on my screen View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 11

Core55 output View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series

Question 12

Can the flow switch be positioned a few inches after the cell? View answer

Asked 8 ´months ago | Sanitation > Salt Chlorinators

Question 13

7 month old system and no chlorine View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 14

Do I need a fuse reset button or a new fuse? RJ+ 60 model. View answer

Asked 1 ´year ago

Question 15

If I get the 3 tank regulator but only 1 tank, can I cap off the unused connections for possible future use? View answer

Asked 8 ´months ago

Question 16

Can the RJ+ salt cell be installed vertically? View answer

Asked 1 ´year ago

Question 17

I have purchased a Core 35 to convert my Fiberglass inground pool to salt water for 2023. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series

Question 18

Is it possible to plug in the CORE to a timer which then regulates when the CORE turns on and off? View answer

Asked 6 ´months ago | Support

Question 19

How do I order a SI+25 cell replacement? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool® Universal25 Salt Chlorine Generator

Question 20

what are dimensions of control box. RJ-30 I want to mount it on the circuit breaker panel. View answer

Asked 1 ´year ago

Question 21

can the tanks be out in the sun I live in so cal and I t gets hot in Vally I don't have storage View answer

Asked 1 ´year ago

Question 22

NO SALINITY READING WHEN BUTTON PUSHED ON RJ30 PLUS View answer

Asked 6 ´months ago

Question 23

All, I received my RJ-30 generator in the winter of 2019, installed for last season, this season I have been fighting with algae growth, and I think it is due to a defective flow sensor, is there some way I can clean it, or otherwise troubleshoot it before I have to replace the whole thing? I touched the wire on it today, and it stopped flickering with no-flow, and started generating again, so I am sure this is the issue. Please let me know, Louise View answer

Asked 4 ´years ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 24

my old cell housing is leaking so i need to replace it. i ordered a new one which has treaded connectors but the existing housing was glued to the PVC . What parts do I need to connect the new housing unit? I have a SJ View answer

Asked 3 ´years ago

Question 25

I have a core35. Is it necessary to remove the head for winter? Will this cap fit? View answer

Asked 3 ´years ago

Question 26

I have to remove my core 35. Can I install these with a piece of PVC pipe until the Core 35 is checked out? View answer

Asked 2 ´years ago

Question 27

I just bought one of these to replace my origional SJ-55 Housing that does not have the xxxx on adapters to connect to the return line. Is there an O-Ring that goes between the adapter and the Clear Housing to insure a complete seal? View answer

Asked 3 ´years ago

Question 28

How do you get the wire through the hole View answer

Asked 2 ´years ago

Question 29

My cap is cracked at the area that appears to be "fused" together...I purchased my SJ-30 in May of 2019. How can I get this part? I have looked all over the internet. View answer

Asked 2 ´years ago

Question 30

Cutting the cord is okay when replacing the collar cap. Or is there a way to disassemble the plug? View answer

Asked 4 ´years ago

Question 31

Chlorine is not being generated. New cell with about 6 months service. Will a problem with the small board not indexing causing this problem? View answer

Asked 2 ´years ago

Question 32

My current Si controller will not index when the button is pushed. Will this fix the problem or do I need the other board? View answer

Asked 2 ´years ago

Question 33

My core 55 is only showing one bar and if I increase the bars, it one flashes on another bar. It also says to clean the unit which I have done several times. What can I do to fix the problem. At first, it was working great. View answer

Asked 2 ´years ago

Question 34

What is the expected lifespan of the CORE55 Replacement Cell. How does the eight year warranty impact the cost of replacing the cell if it applies at all? View answer

Asked 2 ´years ago

Question 35

I reversed the cleaning amounts using more acid than water. Did i destroy the unit ? View answer

Asked 3 ´years ago

Question 36

Why does the boost light flash on my edge pool generator? View answer

Asked 2 ´years ago

Question 37

What alerts does the CircuPool CORE35 advanced system diagnostics provide? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE35 Salt Chlorine Generator

Question 38

How does the CORE35 Control Module mount to the CircuPool CORE35 cell? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE35 Salt Chlorine Generator

Question 39

How do I winterize with this system. View answer

Asked 3 ´years ago

Question 40

I have a 10,000 gallon pool and want to convert to salt. So many questions. It's been 3 years since I drained and replaced 1/2 the water in the pool due to a repair. Should I consider a water replacement prior to conversion ? Under what circumstances should I consider water replacement? Money not an option...which model should I buy? What size? When does increase size not benefit performance for salt conversion power, cell cleaning cycle time, and cell life? Installation should not be a consideration as all would fit my system. Thank you, Bill View answer

Asked 2 ´years ago

Question 41

What is the power draw on the Edge system? View answer

Asked 2 ´years ago

Question 42

On the edge40 for do it yourselfer does this just plug into a gfci outlet. I cant find the installation instructions. I have a small pool maybe 10000-12000 gal. View answer

Asked 3 ´years ago

Question 43

What is the length of the EDG40 chlorine generator cell, please? Just end-of-threads-to-end-of-threads... View answer

Asked 3 ´years ago

Question 44

Can this be used for an 8’x8’ below ground hot tub? View answer

Asked 3 ´years ago

Question 45

I have a limited length of 2" pipe to install the generator. What is the length of pipe needed to be cut out for install? Does the unit come with a cut template? View answer

Asked 3 ´years ago

Question 46

Does the CircuPool CORE35 salt system need professional installation? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE35 Salt Chlorine Generator

Question 47

I am replacing a Hayward system. I will eventually replace the control panel also but for now need ot know if I need to purchase anything else to connect to the existing control panel. it has a plug that connects to it now. Do I need to purchase a separate plug to connect to the control panel? View answer

Asked 4 ´years ago

Question 48

What are the standout features of the CircuPool CORE35 salt system? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE35 Salt Chlorine Generator

Question 49

Who sells and installs the EDGE 25/40 in Orlando Florida Area? View answer

Asked 4 ´years ago

Question 50

What is the total dimension for the flow switch and cell for the Edge 40? 11 3/4 inches View answer

Asked 4 ´years ago

Sanitation Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools