Salt Chlorinators Q&A

Question 1

What Cell setting should I program my box too when using the ul25 View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 2

What is the current draw of the entire system if running on 110VAC? View answer

Asked 3 ´years ago

Question 3

Brand new rj30 won’t read salinity and cell amps read zero at max power View answer

Asked 3 ´months ago

Question 4

I have an RJ30 unit which I turn off at night. Start up in the morning results in a noticeable motor sound. I can View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series

Question 5

I bought an Si 40 system 1 month ago. I get Slo error even tho salt ppm is 3500. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 6

Just started recently, when the unit first turns on, it hums and vibrates. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 7

Definition of CL power View answer

Asked 3 ´months ago

Question 8

can the Core 55 system be installed vertically View answer

Asked 2 ´years ago

Question 9

Why not sell the flow switch with the Tee? But you you show the sensor with the tee to sell the sensor. View answer

Asked 1 ´year ago

Question 10

i HAVE A 25,000 GAL POOL WILL THE CORE35 BE SUFFICIENT? View answer

Asked 2 ´years ago

Question 11

I soaked the cell in the muratic acid solution for 10’ but there are still mineral deposits visible on both ends View answer

Asked 1 ´year ago

Question 12

My RJ 45 unit the screen is showing me no amperage what could be the cause View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 13

Runs hot! View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 14

is there a way to calibrate the cell? salt level in the pool shows to be around 3900 and the display shows salt too low...any help greatly appreciated..thank you... it is a si30 system with a 15000 gallon pool View answer

Asked 2 ´years ago

Question 15

is it plug and play 120 volt input hook-up. is it all in one inside program box is there a transformer inside the panel? or do I need extural View answer

Asked 2 ´years ago

Question 16

Is the flow through the cell directional? Does it matter which way I install it? View answer

Asked 3 ´years ago

Question 17

how to register my product View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 18

Is a Zinc Anode required? View answer

Asked 1 ´year ago

Question 19

sacrificial anode / cyanuric acid stabilizer level in pool? View answer

Asked 1 ´year ago

Question 20

How do you winterize the unit? View answer

Asked 3 ´years ago

Question 21

After connecting power cables to power source, voltage reading is at 7.5 and cell amperage reads -0.00. Please help View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 22

Why won't my SJ20 cycle the reverse polarity. It's causing the plates to get covered very quickly. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > SJ Series > CircuPool SJ-A Series Salt Chlorine Generators - Owner Resources

Question 23

Hot light staying on panel View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 24

High salt View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 25

What size are the threads and pipe? View answer

Asked 4 ´months ago

Question 26

Is it ok for the chlorine generator to stay powered on 24 hours a day while the pool pump only runs about 10 hours? View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > CORE Series > CircuPool CORE Series Salt Chlorine Generators - Owner Resources

Question 27

Hi, I have a pool of 22.000 gallons with a pump pentair of 2 HP SF-N1-2A (85 GPM Aprox). If I Installed a Universal 40 how many hours a day I must turn on the system ?. I live in Colombia and the temperature of the water is about 84 F. When you talk about 2.0 lb, how many working hours it means ? Regards, Diego. View answer

Asked 3 ´years ago

Question 28

I own this system but it sometimes does not produce enough chlorine for my 240 00 gallon pool, guess to runtime being less than 24 hours. can i upgrade to RJ 60 salt cell without changing controller? will controller recognize larger cell and correctly produce chlorine? View answer

Asked 2 ´years ago

Question 29

The Flow LED on the panel will turn green for aprox. 10 seconds and then go red for aprox. 2 min. When it will go green again for 10 seconds repeating. Could this be a faulty flow switch or something else? View answer

Asked 2 ´years ago

Question 30

The RJ45+ touch pad stopped working properly View answer

Asked 5 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 31

What is the minimum required flow (in GPM) for the RJ60+ Flow Switch to close and enable the Salt Cell to generate Chlorine? View answer

Asked 2 ´years ago

Question 32

Will the system say when it’s time to change the cell? View answer

Asked 4 ´years ago

Question 33

Will any sand filter work with this system or do i need a newer sand filter? Mine is almost 25 years old. View answer

Asked 4 ´years ago

Question 34

Is there a place where i can get actual dimensions? Like a shop drawing. Ive already managed to rule out the CORE55 from rough dimensions given to another. I suspect this model will be a much more close call on fitting. View answer

Asked 4 ´years ago

Question 35

can this cell be mounted vertically View answer

Asked 2 ´months ago

Question 36

cell voltage reads 30.5 when generating View answer

Asked 5 ´months ago | Sanitation > Salt Chlorinators > Universal Series > CircuPool Universal Series Salt Chlorine Generators - Owner Resources

Question 37

Hello, I have just purchased the RJ-30 Plus Salt system, and wanted to know it's power usage in Watts and Amps. Also, is it more efficient to connect it to 220v vs. 120v, and if so, how much more efficient? Whats the amperage & wattage for 220v vs. 120v connections? Thank you! View answer

Asked 3 ´years ago

Question 38

What is the RJ+ cell unit's maximum pressure (PSI) rating? View answer

Asked 2 ´years ago

Question 39

How do I shock my salt water pool that has a RJ60+ system. View answer

Asked 2 ´years ago

Question 40

what size pipe is used for the inlet and outlet and is it PVC? View answer

Asked 2 ´years ago

Question 41

I have the Edge40. After a big rainstorm, the system told me that salt level was low. I added a few bags, and got it tested. Showings 4500 level. I had it running on high and boost for about 6 hours, yet my chlorine levels were still extremely low. I then cleaned the cell by the book and ran it again for a few hours with no change to chlorine levels. Still shows no chlorine when tested. I looked at the cell with a flashlight while it was running. I did see the electrolysis bubbles being formed. Yet after a few hours the chlorine levels did not rise. Please advise. View answer

Asked 3 ´years ago

Question 42

What does a water temperature of 159 mean? View answer

Asked 2 ´months ago

Question 43

Where can I find the CircuPool serial number on my equipment?? View answer

Asked 11 ´months ago

Question 44

I just upgraded my cell from a SI45 to SI 60. currently shows F-15. what setting Does it need to be changed to View answer

Asked 1 ´year ago

Question 45

Does this system have a remote start View answer

Asked 3 ´years ago

Question 46

How do you replace the fuse? View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 47

if set below 70% my generator stops generating. i shut off and turn on it starts generating then stops again View answer

Asked 4 ´months ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 48

Cell Connection message. I have done everything in the trouble shooting area in the manual. View answer

Asked 1 ´year ago | Sanitation > Salt Chlorinators > RJ PLUS Series > CircuPool RJ-PLUS Series Salt Chlorine Generators - Owner Resources

Question 49

The description says this can be installed horizontally or vertically but then the website shows a ventricle installation kit. Does this mean the unit as purchased cannot be installed vertically out of the box? View answer

Asked 3 ´years ago

Question 50

Can you use the flow switch from my Hayward system or do I have to change it? Also what would be the shipping time after I order? Universal 40 View answer

Asked 3 ´years ago

Salt Chlorinators Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools